Data processing codes for balloon-borne measurements with the Broadband Radiation Probe (BP) on MOSAiC
The data processing codes were established to process raw data files recorded by the broadband radiation probe (Lonardi et al. 2022) during balloon-borne measurements on the Multidisciplinary Observatory for the Study of Arctic Climate (MOSAiC, Shupe et al. 2022) expedition. This Matlab file process...
| Main Author: | |
|---|---|
| Format: | Software |
| Language: | unknown |
| Published: |
2023
|
| Subjects: | |
| Online Access: | https://zenodo.org/record/7562228 https://doi.org/10.5281/zenodo.7562228 |
| Summary: | The data processing codes were established to process raw data files recorded by the broadband radiation probe (Lonardi et al. 2022) during balloon-borne measurements on the Multidisciplinary Observatory for the Study of Arctic Climate (MOSAiC, Shupe et al. 2022) expedition. This Matlab file processes the raw data files of a pair of up- and down-looking pyrgeometers (CGR4, Kipp & Zonen) and a pair of up- and down-looking pyranometers (CMP3, Kipp & Zonen). Additional data from a pressure and temperature sensor (BME280, Bosch) and from an inertial measurement unit (10-DOF, Adafruit Industries) are combined. Overall, the data is calibrated and temperature corrected. The terrestrial dataset is additionally deconvoluted and averaged over 3 seconds. The barometric altitude is calculated based on a pressure and temperature sensor (BME280, Bosch) at the start of each balloon flight. The codes were used to process the data set published on PANGAEA: https://doi.org/10.1594/PANGAEA.944200 and https://doi.org/10.1594/PANGAEA.944232 |
|---|