Shape optimization of a hydrofoil with leading-edge protuberances using full factorial sweep sampling and an RBF surrogate model
This paper investigates improving the leading-edge of a hydrofoil with sinusoidal protuberances based on its hydrodynamic performance. The original hydrofoil geometry was inspired by the leading edge of the flipper of a humpback whale. A multi-step optimization process was performed for a 634-021 hy...
Main Authors: | , |
---|---|
Format: | Article in Journal/Newspaper |
Language: | English |
Published: |
2020
|
Subjects: | |
Online Access: | https://strathprints.strath.ac.uk/89527/ https://doi.org/10.17402/426 |
Summary: | This paper investigates improving the leading-edge of a hydrofoil with sinusoidal protuberances based on its hydrodynamic performance. The original hydrofoil geometry was inspired by the leading edge of the flipper of a humpback whale. A multi-step optimization process was performed for a 634-021 hydrofoil. The free-form deformation technique defined the shape parameters as a variable design, and these parameters included the amplitude of the leading-edge protuberances, which ranged from 0 to 20% of the chord length, and the corrugate span, with 3 and 4 crests. The flow characteristics of a parametric hydrofoil were examined using a CFD solver, and the lift, drag, and lift-to-drag ratio (L/D) were computed as responses to the optimization cycle. To accomplish this, two design study methods were sequentially applied at different angles of attack. A full factorial design sweep tool was applied that went through all parameter value combinations, and an RBF-based surrogate model was constructed to investigate the system behavior. The results indicated the existence of an optimum design point, and the highest L/D ratio was determined to be 10.726 at a 12° angle of attack. |
---|