Mapping of top of permafrost using a direct current resistivity survey
Data from a direct current resistivity survey and geologic logs from boreholes were used to map the top of permafrost at a remote Air Force installation in Alaska. This study resulted from a remedial investigation that was conducted at Eielson Air Force base near Fairbanks, Alaska under the federal...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Report |
| Language: | English |
| Published: |
Pacific Northwest Laboratory
1995
|
| Subjects: | |
| Online Access: | https://doi.org/10.2172/114639 http://digital.library.unt.edu/ark:/67531/metadc622828/ |
| Summary: | Data from a direct current resistivity survey and geologic logs from boreholes were used to map the top of permafrost at a remote Air Force installation in Alaska. This study resulted from a remedial investigation that was conducted at Eielson Air Force base near Fairbanks, Alaska under the federal Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) regulations. The depth and continuity of the permafrost was important in determining the fate of petroleum contamination that was inadvertently discharged to the ground during earlier Air Force operations. The results indicate that the top of permafrost forms a highly irregular surface. In general, however, the top of permafrost forms a diagonal ridge at the center of the contour grid that is bordered on each side by troughs. |
|---|