Interferometria SAR per lo studio di movimenti e generazione di modelli digitali del terreno in Antartide

• Main Author: Lugli, Andrea <1977>
• Other Authors: Vittuari, Luca
• Format: Doctoral or Postdoctoral Thesis
• Language: English
• Published: Alma Mater Studiorum - Università di Bologna 2010
• Subjects: ICAR/06 Topografia e cartografia; Drygalski; Drygalski Ice Tongue; Victoria Land; Antarc*; Antarctica; Antartide; Ice Shelf
• Online Access: https://amsdottorato.unibo.it/id/eprint/3149/; https://amsdottorato.unibo.it/id/eprint/3149/1/Lugli_Andrea_tesi.pdf

Satellite SAR (Synthetic Aperture Radar) interferometry represents a valid technique for digital elevation models (DEM) generation, providing metric accuracy even without ancillary data of good quality. Depending on the situations the interferometric phase could be interpreted both as topography and as a displacement eventually occurred between the two acquisitions. Once that these two components have been separated it is possible to produce a DEM from the first one or a displacement map from the second one. InSAR DEM (Digital Elevation Model) generation in the cryosphere is not a straightforward operation because almost every interferometric pair contains also a displacement component, which, even if small, when interpreted as topography during the phase to height conversion step could introduce huge errors in the final product. Considering a glacier, assuming the linearity of its velocity flux, it is therefore necessary to differentiate at least two pairs in order to isolate the topographic residue only. In case of an ice shelf the displacement component in the interferometric phase is determined not only by the flux of the glacier but also by the different heights of the two tides. As a matter of fact even if the two scenes of the interferometric pair are acquired at the same time of the day only the main terms of the tide disappear in the interferogram, while the other ones, smaller, do not elide themselves completely and so correspond to displacement fringes. Allowing for the availability of tidal gauges (or as an alternative of an accurate tidal model) it is possible to calculate a tidal correction to be applied to the differential interferogram. It is important to be aware that the tidal correction is applicable only knowing the position of the grounding line, which is often a controversial matter. In this thesis it is described the methodology applied for the generation of the DEM of the Drygalski ice tongue in Northern Victoria Land, Antarctica. The displacement has been determined both in an ...