Design Optimization of a Multiphase Coplanar Capacitive Sensor
Detecting oil under the ice in arctic regions with current remote sensing techniques is challenging due to several factors, such as the attenuation of radio-frequency electromagnetic waves and the unknown properties of oil that vary depending on its type and the environmental conditions. To address...
| Published in: | 2023 IEEE International Conference on Imaging Systems and Techniques (IST) |
|---|---|
| Main Authors: | , , , |
| Format: | Article in Journal/Newspaper |
| Language: | English |
| Published: |
IEEE
2023
|
| Subjects: | |
| Online Access: | https://research.manchester.ac.uk/en/publications/1e4c156b-ce33-430f-9e76-aaaf78ed5aea https://doi.org/10.1109/IST59124.2023.10355738 https://pure.manchester.ac.uk/ws/files/297750603/Design_Optimization_of_a_Multiphase_Coplanar_AAM.pdf http://www.scopus.com/inward/record.url?scp=85182729208&partnerID=8YFLogxK |
| Summary: | Detecting oil under the ice in arctic regions with current remote sensing techniques is challenging due to several factors, such as the attenuation of radio-frequency electromagnetic waves and the unknown properties of oil that vary depending on its type and the environmental conditions. To address this problem, we propose a planar capacitive sensor that works in the quasi-electrostatic domain to detect and characterize oil under ice based on its dielectric properties. This paper focuses on the design optimization process that was conducted with the aim of improving the sensitivity and penetration depth of our proposed sensor. Our design optimization process studies different geometrical and electrical parameters and compares the sensor performance obtained from using grounded (passive) backplanes and driven (active) guards. It includes a set of simulations performed using ANSYS electrostatic simulation software and a set of experiments performed under indoor laboratory conditions. The results demonstrated the effectiveness of the optimized sensor design, which is based on a pair of trapezoidal electrodes that are implemented on separate PCBs and surrounded by driven guards. Another major novelty of our proposed sensor design is based on measuring the mutual capacitance between the two sensor plates after changing the horizontal distance between them using a dynamic mounting setup. This allows us to take a number of capacitance measurements at different penetration depths of the electric field before using them to detect the presence of oil and estimate its thickness. Further tests in real-world scenarios are planned for future work. |
|---|