Subsurface temperature at Lomonosovfonna, Svalbard, April 2012-2016

The dataset contains subsurface temperature measurements done at Lomonosovfonna, Svalbard, during April 2012 - 2016. All measurements are done at the site with coordinates: 78.8235 N, 17.432 E. The data is contained in four cells of a matlab structure containing data from installations deployed in A...

Full description

Bibliographic Details
Main Authors: Marchenko, Sergey, Pohjola, Veijo A, Pettersson, Rickard
Format: Dataset
Language:English
Published: PANGAEA 2019
Subjects:
TP
Online Access:https://doi.pangaea.de/10.1594/PANGAEA.902613
https://doi.org/10.1594/PANGAEA.902613
Description
Summary:The dataset contains subsurface temperature measurements done at Lomonosovfonna, Svalbard, during April 2012 - 2016. All measurements are done at the site with coordinates: 78.8235 N, 17.432 E. The data is contained in four cells of a matlab structure containing data from installations deployed in April 2012 - cell 1, April 2013 - cell 2, April 2014 - cell 3 and April 2015 - cell 4. In 2012-2014 nine thermistor strings were installed in each year. The nine T-strings were arranged in a 3*3 square grid with a 3 m spacing between neighboring strings. In 2015 one t-string was installed. Hardware: Campbell Scientific CR10X data loggers in combination with several relay multiplexers (AM416 of AM16/32B) were used for temperature measurements. For that a reference temperature stable resistor (Rr Ohm) was connected is series with thermistors. Known excitation voltage (Ue) was supplied to the circuit and the voltage was measured (Um) at the leads of the reference resistor. The resistance of a thermistor (Rt) was then calculated as: Rt = Ue * Rr / Um - Rr. The resistance was then converted to temperature values provided by the manufacturer of thermistors. Technical information is contained in the variables: LF{N}.T.system. The raw temperature measurements along with the time stamps and depths are contained in the variables LF{N}.T.system.T_raw, LF{N}.T.system.t_raw and LF{N}.T.system.z_raw. After unpacking the data was subjected to the following post-processing steps: - delete data from sensors that were left above the snow surface - for the sensors installed in April 2013: delete data after 2013 July 12 - reset temperature values outsides of the range [-40 +10] degC to NaN - for the sensors installed in April 2015: correct values from one of the sensors by linear interpolation in time between the following time points: 2015 November 15 02:00 and 2015 November 15 14:00, 2015 December 18 15:00 and 2015 December 19 21:00 - introduce corrections to depths of sensors to match temperature distributions measured at different ...