Mineralization potential of water-dissolved CO2 and H2S injected into basalts as function of temperature: Freshwater versus Seawater

Highlights • Reaction path models quantified gas-charged waters/basalt interactions • Gas-charged freshwater and seawater compared • Geochemical reactions modelled at temperatures from 25 to 260°C • Optimal conditions for subsurface mineralization of CO2 and H2S identified Mineralization of freshwat...

Full description

Bibliographic Details
Published in:International Journal of Greenhouse Gas Control
Main Authors: Marieni, Chiara, Voigt, Martin, Clark, Deirdre E., Gíslason, Sigurður R., Oelkers, Eric H.
Format: Article in Journal/Newspaper
Language:English
Published: Elsevier 2021
Subjects:
Online Access:https://oceanrep.geomar.de/id/eprint/54288/
https://oceanrep.geomar.de/id/eprint/54288/1/marieni2021.pdf
https://doi.org/10.1016/j.ijggc.2021.103357
Description
Summary:Highlights • Reaction path models quantified gas-charged waters/basalt interactions • Gas-charged freshwater and seawater compared • Geochemical reactions modelled at temperatures from 25 to 260°C • Optimal conditions for subsurface mineralization of CO2 and H2S identified Mineralization of freshwater-dissolved gases, such as CO2 and H2S, in subsurface mafic rocks is a successful permanent gas storage strategy. To apply this approach globally, the composition of locally available water must be considered. In this study, reaction path models were run to estimate the rate and extent of gas mineralization reactions during gas-charged freshwater and seawater injection into basalts at temperatures of 260, 170, 100, and 25°C. The calculations were validated by comparison to field observations of gas-charged freshwater injections at the CarbFix2 site (Iceland). The results show that more than 80% of the injected CO2 dissolved in freshwater or seawater mineralizes as Ca and Fe carbonates at temperatures ≤170°C after reaction of 0.2 mol/kgw of basalt, whereas at 260°C much lower carbon mineralization rates are observed in response to the same amount of basalt dissolution. This difference is due to the competition between carbonate versus non-carbonate secondary minerals such as epidote, prehnite, and anhydrite for Ca. In contrast, from 80 to 100% of the injected H2S is predicted to be mineralized as pyrite in all fluid systems at all considered temperatures. Further calculations with fluids having higher CO2 contents (equilibrated with 9 bar pCO2) reveal that i) the pH of gas-charged seawater at temperatures ≤170°C is buffered at ≤6 due to the precipitation of Mg-rich aluminosilicates, which delays CO2 carbonation; and ii) the most efficient carbonation in seawater systems occurs at temperatures <150°C as anhydrite formation is likely significant at higher temperatures.