Dissolution kinetics of biogenic silica in the water column

• Published in: Geochimica et Cosmochimica Acta
• Main Authors: Rickert, Dirk, Schlüter, Michael, Wallmann, Klaus J. G.
• Format: Article in Journal/Newspaper
• Language: English
• Published: Elsevier 2002
• Subjects: Norwegian Sea; Southern Ocean
• Online Access: https://oceanrep.geomar.de/id/eprint/252/; https://oceanrep.geomar.de/id/eprint/252/1/1-s2.0-S0016703701007578-main.pdf; https://doi.org/10.1016/S0016-7037(01)00757-8

Stirred flow-through experiments were conducted for the first time with planktonic biogenic silica (BSi). We investigated the dissolution kinetics of uncleaned and chemically cleaned BSi collected in ocean surface water, sediment traps, and sediments from the Norwegian Sea, the Southern Ocean, and the Arabian Sea. The solubility at 2°C is rather constant (1000 to 1200 μM). The dissolution rates are, however, highly variable, declining with water depth, and phytoplankton reactivity is two to three orders of magnitude higher than pure siliceous oozes. The reactivity decrease correlates well with an increase in the integrated peak intensity ratios of Si-O-Si/Si-OH measured by Fourier transform infrared (FTIR) spectroscopy. The removal of organic or inorganic coatings enhance the reactivity by at least an order of magnitude. Atomic Al/Si ratios of 0.03 to 0.08 in sedimentary diatom frustules decrease significantly to 0.02 as a result of removal of inorganic coatings and detritals present. Near equilibrium, the dissolution rates exhibit a linear dependence on the degree of undersaturation. At higher degrees of undersaturation—that is, at low concentrations of dissolved silica—the dissolution rates of uncleaned samples define a nonlinear trend. The nonlinear kinetics imply that the dissolution of natural BSi is strongly accelerated in silica-depleted surface waters. The FTIR results suggest that internal condensation reactions reduce the amount of surface reaction sites and are partly responsible for the reactivity decrease with depth. The high content of Al in sedimentary BSi is likely caused by precipitation of dissolved silica with Al dissolved from minerals in sediment. Nonbiogenic silica as coatings or detritals are partly responsible for the solubility and reactivity decrease of BSi in sediments. One order of magnitude different rate constants measured in Norwegian Sea and Southern Ocean sediment trap material support the so-called opal paradox—that is, high BSi accumulation rates in sediments in spite of low ...