| Summary: | A non-linear coupled-mode system of horizontal equations has been derived with the aid of Luke's (1967) variational principle, modelling the evolution of nonlinear water waves in intermediate depth and over a general bathymetry Athanassoulis & Belibassakis (2002, 2008). Following previous work by the authors in the case of linearised water waves (Athanassoulis & Belibassakis 1999), the vertical structure of the wave field is exactly represented by means of a local-mode series expansion of the wave potential. This series contains the usual propagating and evanescent modes, plus two additional modes, the free-surface mode and the sloping-bottom mode, enabling to consistently treat the non-vertical end-conditions at the free-surface and the bottom boundaries. The coupled-mode system fully accounts for the effects of non-linearity and dispersion. The main feature of this approach that a small number of modes (of the order of 5-6) are enough for the precise numerical solution, provided that the two new modes (the free-surface and the sloping-bottom ones) are included in the local-mode series. The consistent coupled-mode system has been applied to numerical investigation of families of steady nonlinear travelling wave solutions in constant depth (Athanassoulis & Belibassakis 2007) showing good agreement with known solutions both in the Stokes and the cnoidal wave regimes. In the present work we focus on the hydroelastic analysis of floating bodies lying over variable bathymetry regions, with application to the non-linear scattering of water waves by large floating structures (of VLFS type or ice sheets) characterised by variable thickness (draft), flexural rigidity and mass distributions, modelled as thin plates of variable thickness, extending previous approaches (see, e.g., Porter & Porter 2004, Belibassakis & Athanassoulis 2005, 2006, Bennets et al 2007). Numerical examples are presented, showing that useful results can be obtained for the analysis of large floating elastic bodies or structures very efficiently by keeping only a few terms in the expansion. Ideas for extending our approach to 3D are also discussed. Copyright © 2009 by ASME.
|
|---|