Ice interaction with Adams Island, winter 1982-83

A small island (200 m in diameter) is being used to study the interaction of the ice cover with the island and the response of the ice cover to the environmental driving forces. The environmental factors of wind, air temperature, current and tide were measured. Horizontal movements of the ice cover...

Full description

Bibliographic Details
Main Authors: Frederking, R. M. W., Sayed, M., Wessels, E., Child, A. J., Bradford, D.
Format: Article in Journal/Newspaper
Language:English
Published: Hamburgische Schiffbau-Versuchsanstalt GmbH 1984
Subjects:
ice
ile
Online Access:https://nrc-publications.canada.ca/eng/view/object/?id=11214749-3ebd-4e74-a838-6a485d3f22ff
https://nrc-publications.canada.ca/fra/voir/objet/?id=11214749-3ebd-4e74-a838-6a485d3f22ff
Description
Summary:A small island (200 m in diameter) is being used to study the interaction of the ice cover with the island and the response of the ice cover to the environmental driving forces. The environmental factors of wind, air temperature, current and tide were measured. Horizontal movements of the ice cover varied from 10 cm per day in March to 2 cm per day in June. The direction of movement did not correspond to wind or current direction. Average strain rates measured with small (0.3 m) gauge length strain meters and large (~100 m) triangular arrays were of the order of 10-⁹ s-¹. Direct measurements of stress and values calculated from the strain rate were of the order of 100 kPa. L'objet de cette étude est d'examiner l'interaction du manteau glaciel avec une petite île de 200 m de diamètre, ainsi que le comportement du manteau glaciel en relation avec les forces environnementales. Les facteurs environnementaux tels que le vent, la température de l'air, les courants et les marées ont été mesurés. Les déplacements horizontaux du manteau glaciel ont varié entre 10 cm par jour en mars et 2 cm par jour en juin. La direction des déplacements ne correspondait pas à celle des vents et des courants. Les taux moyens de déformation mesurés avec des jauges de petite longueur (0,3 cm) et de grands systèmes triangulaires (de ±100 m) étaient de l'ordre de 10-⁹ s-¹. Les mesures directes de contrainte et les valeurs deduites du taux de déformation étaient de l'ordre de 100 kPa. Reprinted as NRC technical report DBR Paper No. 1295, 1985. Réimprimé comme un rapport technique du CNRC, no. 1295, 1985. Peer reviewed: Yes NRC publication: Yes