On the suitability of capacitive resistivity imaging (CRI) for permafrost monitoring

Permafrost covers about 24% of the exposed land in the northern hemisphere and is abundant in various regions in Europe, mainly as mountain permafrost. This type is very sensitive to climate warming, because its temperature is only marginally below the freezing point. In recent years permafrost degr...

Full description

Bibliographic Details
Main Author: Uhlemann, Sebastian
Format: Text
Language:unknown
Published: 2012
Subjects:
Online Access:http://nora.nerc.ac.uk/id/eprint/500982/
Description
Summary:Permafrost covers about 24% of the exposed land in the northern hemisphere and is abundant in various regions in Europe, mainly as mountain permafrost. This type is very sensitive to climate warming, because its temperature is only marginally below the freezing point. In recent years permafrost degradation frequently caused large rockfall events, which represent a fatal danger for the population in the alpine regions. Therefore, modelling and monitoring of permafrost is becoming a focus of several research groups. This thesis investigates the suitability of capacitive resistivity imaging (CRI) for obtaining supporting information for the different areas of permafrost research, in terms of subsurface characterisation and estimation of temperatures; there is a strong relationship between resistivity and temperature, especially for values below the freezing point. For this purpose numerical simulations of a quasi-static quadrupole over a homogeneous halfspace and a finite rock sample are carried out and intensive laboratory studies on a Tuffeau chalk sample are made. The numerical simulations indicate that dipole combinations employing small dipole separations are prone to error, because the electrodes cannot be considered as point poles and geometric effects become important for small separations. Moreover, the results indicate a higher sensitivity of the imaginary part of the complex transfer impedance to the geometric configuration of the quadrupole than the real part shows. Therefore, the experimental use of the imaginary part is limited to be only qualitative. It is shown, that these results are in accord with previous theoretical estimations. By comparison, the real parts of the complex transfer impedance obtained from numerical simulations and experimental work are found to be consistent, supporting the validity of both estimates. This highlights the benefits of numerical simulations in the evaluation of the properties of the experimental setup. To study the effects of changing sample conditions on the ...