Wind stress measurements from the open ocean corrected for air flow distortion by the ship

A large dataset of wind stress estimates, covering a wide range of wind speed and stability conditions, was obtained during three cruises of the RRS Discovery in the Southern Ocean. These data were used by Yelland and Taylor to determine the relationship between 10-m height, neutral stability values...

Full description

Bibliographic Details
Main Authors: Yelland, M.J., Moat, B.I., Taylor, P.K., Pascal, R.W., Hutchings, J., Cornell, V.C.
Format: Article in Journal/Newspaper
Language:unknown
Published: 1998
Subjects:
Online Access:http://nora.nerc.ac.uk/id/eprint/139165/
http://ams.allenpress.com/amsonline/?request=get-abstract&issn=1520-0485&volume=028&issue=07&page=1511
https://doi.org/10.1175/1520-0485(1998)028<1511:WSMFTO>2.0.CO;2
Description
Summary:A large dataset of wind stress estimates, covering a wide range of wind speed and stability conditions, was obtained during three cruises of the RRS Discovery in the Southern Ocean. These data were used by Yelland and Taylor to determine the relationship between 10-m height, neutral stability values for the drag coefficient, and the wind speed, and to devise a new formulation for the nondimensional dissipation function under diabatic conditions. These results have been reevaluated allowing for the airflow distortion caused by the ship. The acceleration and vertical displacement of the flow have been modeled in three dimensions using computational fluid dynamics (CFD). The CFD modeling was tested, first by comparison with wind tunnel measurements on models of two Canadian research ships and second, by analysis of data from four anemometers on the foremast of the RRS Charles Darwin. Originally, the four anemometers gave drag coefficient values that differed by up to 20% from one to another and were all unexpectedly high. The CFD results showed that the airflow had been decelerated by 4%–14% and displaced vertically by about 1 m. These effects caused the original drag coefficient results to be overestimated by up to 60%. After correcting for flow distortion effects, the results from the different anemometers became consistent, which gave confidence in the quantitative CFD-derived corrections. The CFD modeling showed that the anemometer position on the RRS Discovery was much less affected by airflow distortion. For a given wind speed the CFD corrections reduced the drag coefficient by about 6%. The resulting mean drag coefficient to wind speed relationship confirmed that suggested by Smith from a more limited set of open ocean data. The effects of flow distortion are sensitive to changes in the relative wind direction. It is shown that much of the scatter in drag coefficient estimates may be due to variations in airflow distortion rather than to the effect of changing sea states. The Discovery wind stress data is ...