The influence of particle size distribution on bio-coal gasification rate as related to packed beds of particles

This thesis is a part of a collaboration between Höganäs AB and Luleå University of Technology, aiming at replacing fossil process coal with bio-coal in their sponge iron process. The difference in gasification reactivity, i.e. reaction rate, between fossil coals and bio-coals is the major challenge...

Full description

Bibliographic Details
Main Author: Bäckebo, Markus
Format: Bachelor Thesis
Language:English
Published: Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik 2020
Subjects:
Online Access:http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-79084
Description
Summary:This thesis is a part of a collaboration between Höganäs AB and Luleå University of Technology, aiming at replacing fossil process coal with bio-coal in their sponge iron process. The difference in gasification reactivity, i.e. reaction rate, between fossil coals and bio-coals is the major challenge in the endeavor to decrease the climate impact of the existing process. The goal of this thesis is to develop a model of reaction rate for bio-coals in relation to particle size distribution. Different particle size distributions were combined and tested to see how that affects the effective reaction rate. Within the scope of this work, gasification reactivities of different materials, including coal, cokes, and bio-coals, were determined. Three bio-coals were selected to study the effect of particle size distribution on reactivity. Kinetic parameters were determined by using thermogravimetric analysis in the temperature range of 770-850 °C while varying CO2 partial pressure between 0.1-0.4 atm. The effect of particle size on the reaction rate was investigated by using particles with diameter between 0.18 and 6.3 mm. The effect of particle size distribution on the reactivity of bio-coal in a packed bed was carried out in a macro thermogravimetric reactor with a constant bed volume of 6.5 cm3 at 980 °C and 40% (vol.) of CO2. The experimental investigation in three different rate-limiting steps was done for one bio-coal sample, i.e. Cortus Bark bio-coal. The activation energy of the bio-coal was 187 kJ mol-1, and the reaction order was 0.365. For the internal diffusion control regime, an increase in particle size resulted in low reaction rate. The effective diffusivity calculated from the Thiele modulus model was 1.41*10-5 m2 s-1. For the external diffusion control regime, an increase in particle size increased the reaction rate up to a certain point where it plateaued at >1 mm. By choosing two discrete particle size distributions, where a smaller average distribution can fit into a larger average distribution the ...