| Summary: | The introduction of Fibre Reinforced Polymers (FRP) to the civil engineering market in the late 1980s resulted in the emergence of a range of new tools for rehabilitating and strengthening concrete structures. Strengthening using FRPs is typically accomplished using non-prestressed externally bonded FRPs. The technical and economic benefits of such strengthening could be further increased by prestressing the FRPs, especially when dealing with concrete structures. Prestressing concrete structures suppresses the appearance and growth of cracks in the serviceability limit state. This in turn increases the structure’s stiffness and resistance to degradation. Prestressing also increases the structure’s yield load but does not change its failure load relative to that of an analogous non-prestressed structure, provided that all other parameters are kept constant. In 2004, a pilot study was carried out at the Luleå University of Technology (LTU) to investigate the scope for using unbonded Carbon Fibre Reinforced Polymer (CFRP) strengthening systems, particularly those involving prestressing. In the early stages of this project, a number of difficulties were encountered in anchoring the CFRP rods to concrete structures: the conical wedge anchorages that were used tended to either cause premature failure of the rods or allowed the rod to slip out of the anchorage. It was therefore decided to study the mechanisms at work within these anchorages in more detail. The goal of the project was to develop a small, practical, reliable, and userfriendly anchorage for use in unbonded external CFRP strengthening systems. On the basis of a thorough literature review, which is described in Paper 1, it was concluded that despite the difficulties encountered, the conical wedge anchorages used with steel reinforcing rods were the most promising starting point for the design of a new anchorage for use with CFRPs. Importantly, the conical wedge anchorage can be made small in size and easy to mount while retaining a high degree of ...
|
|---|