Using shell-type tuyeres at Pierce–Smith horizontal converters of the Nadezhda Metallurgical Plant
Since 2015 the processing capacity reconfiguration at the Polar Branch of MMC Norilsk Nickel (hereinafter PB) sets new goals for conventional pyrometallurgical processes of smelting and converting. The design flowsheet of Kolesnikov Nadezhda Metallurgical Abstract: Plant (hereinafter NMP) provided f...
| Published in: | Izvestiya Vuzov Tsvetnaya Metallurgiya (Universities Proceedings Non-Ferrous Metallurgy) |
|---|---|
| Main Authors: | , , , , , , , , , |
| Format: | Article in Journal/Newspaper |
| Language: | Russian |
| Published: |
Kalvis
2021
|
| Subjects: | |
| Online Access: | https://cvmet.misis.ru/jour/article/view/1217 https://doi.org/10.17073/0021-3438-2021-1-16-27 |
| Summary: | Since 2015 the processing capacity reconfiguration at the Polar Branch of MMC Norilsk Nickel (hereinafter PB) sets new goals for conventional pyrometallurgical processes of smelting and converting. The design flowsheet of Kolesnikov Nadezhda Metallurgical Abstract: Plant (hereinafter NMP) provided for «cross-converting» when copper matte was first processed in one converter to produce blister copper followed by nickel matte processing to yield copper-nickel converter matte bypassing the discharge of dry coagulated slag. This flowsheet allowed for converter heat balance optimization, decreasing the formation of refractory reverts and significant extension of the converter campaign. PB Nickel Plant shutdown resulted in copper processing elimination at NMP and switching the converters to the conventional nickel converting flowsheet. In turn, it gave rise to the need for solutions to extend converter campaign while maintaining the possibility to process large amounts of nickel slag from the second converting stage at the PB Copper Plant. For this purpose the series of lab experiments were carried out to develop the technology and design documentation for the system to supply oxygen-enriched air (up to 45 %) to horizontal converters using shell-type tuyeres. In addition, literature data were analyzed on this topic along with the experience of smelters in this area. Process design calculations were done. The efforts were taken in cooperation with the PB engineering personnel and Laboratory of Pyrometallurgy of LLC «Gipronickel Institute». The use of reduced diameter shell-type tuyeres to inject the oxygen-air mixture was found to decrease the converter blowing and off-gas volumes. The decline in off-gas quantity leads to reduced heat load on the converter mouth and flue duct system, as well as to lowered converter dust entrainment. The use of oxygen-enriched blowing implies the higher smelt heating rate. Excess heat compensation requires timely charging of cold reverts and flux. In emergencies (if cold reverts are not ... |
|---|