Surface roughness affects early stages of silica scale formation more strongly than chemical and structural properties of the substrate
Precipitation of amorphous silica (SiO2) in geothermal power plants has been shown to occur via homogeneous nucleation in the separated water as well as heterogeneous nucleation on pre-existing surfaces. While the factors facilitating homogeneous nucleation are well known, the effect of surface prop...
| Published in: | Geothermics |
|---|---|
| Main Authors: | , , |
| Format: | Article in Journal/Newspaper |
| Language: | unknown |
| Published: |
2020
|
| Subjects: | |
| Online Access: | https://gfzpublic.gfz-potsdam.de/pubman/item/item_5001698 https://gfzpublic.gfz-potsdam.de/pubman/item/item_5001698_3/component/file_5001802/5001698.pdf |
| Summary: | Precipitation of amorphous silica (SiO2) in geothermal power plants has been shown to occur via homogeneous nucleation in the separated water as well as heterogeneous nucleation on pre-existing surfaces. While the factors facilitating homogeneous nucleation are well known, the effect of surface properties on the heterogeneous pathway are less well understood. We investigated the precipitation of amorphous silica onto different surfaces by placing coupons of opal (= mirroring previously deposited silica), volcanic glass (= common reservoir rocks) and corrosion-resistant carbon steel (= geothermal pipelines) inside the pipelines of the Hellisheiði power plant (SW-Iceland) where they were in contact with a silica-supersaturated geothermal liquid (800 ppm SiO2, 60–120 °C) for up to 10 weeks. Our results showed that the similarities in chemical composition and structure of opal and volcanic glass to the amorphous silica were less important in facilitating nucleation than the rough surface of the carbon steel. However, once the nuclei had formed, their growth was independent of the surface material and only controlled by deployment length, temperature and the concentration of monomeric silica in the separated water. Thus, over time a continuous, botryoidal silica layer formed on all coupons. This suggests that surface properties are not crucial in developing better mitigation strategies against amorphous silica scaling. |
|---|