Strength Behaviors and Constitutive Model of Gas-Saturated Methane Hydrate-Bearing Sediment in Gas-Rich Phase Environment

• Published in: Journal of Marine Science and Engineering
• Main Authors: Yuqi Sun, Yiqun Zhang, Li Liu, Jingsheng Lu, Shouceng Tian, Gensheng Li
• Format: Article in Journal/Newspaper
• Language: English
• Published: MDPI AG 2023
• Subjects: hydrate-bearing; gas-saturated; triaxial test; strength behavior; constitutive model; Naval architecture. Shipbuilding. Marine engineering; VM1-989; Oceanography; GC1-1581; Methane hydrate
• Online Access: https://doi.org/10.3390/jmse11010142; https://doaj.org/article/ef706393feb24e94883463ae0a02bb62

Natural gas hydrates occupy an important position in the development of clean energy around the world in the 21st century. It is of great significance to research the mechanical properties of methane hydrate-bearing sediment (MHBS). In this paper, gas-saturated MHBS were synthesized based on the self-developed triaxial compressor apparatus. The triaxial shear tests were performed at temperatures of 2 °C, 3 °C, and 5 °C and confining pressures of 7.5 MPa, 10 MPa, and 15 MPa. Results indicate that the axial strain process can be divided into three stages: initial elastic deformation, initial yield deformation, and strain softening. When confining pressure is increased, the shear strength of MHBS increases at a lower confining pressure. In contrast, shear strength appears to decrease with increasing confining pressure at a higher confining pressure. There is a negative correlation between temperature and shear strength of MHBS. The initial yield strain of MHBS increases in condition due to the increase in confining pressure and the decrease in temperature. The change in strength degradation is kept within 2 MPa. Using test data, the Duncan-Chang model was modified to describe the strength behaviors of gas-saturated MHBS. The accuracy of the model was verified by comparing calculated values with test data.