Shear strength degradation of gas hydrate-bearing sediment due to partial hydrate dissociation
Extraction of methane hydrate from subseafloor reservoir may potentially trigger seabed slides and induce subsidence. To address the problems, it is crucial to properly characterize the phase equilibrium condition of pore hydrate and the shear strength of the soil. As one of the key constitutive com...
| Published in: | Journal of Rock Mechanics and Geotechnical Engineering |
|---|---|
| Main Authors: | , , , |
| Format: | Article in Journal/Newspaper |
| Language: | English |
| Published: |
Elsevier
2024
|
| Subjects: | |
| Online Access: | https://doi.org/10.1016/j.jrmge.2023.10.002 https://doaj.org/article/dc32663e9ce140fdabdc8f44a3c2e127 |
| Summary: | Extraction of methane hydrate from subseafloor reservoir may potentially trigger seabed slides and induce subsidence. To address the problems, it is crucial to properly characterize the phase equilibrium condition of pore hydrate and the shear strength of the soil. As one of the key constitutive components, the phase equilibrium condition enforces a constraint over pore gas pressure, temperature and unhydrated water content. Such a constraint, however, has been traditionally ignored in analyzing the mechanical behavior of hydrate-bearing soil. In this paper, a series of stepwise hydrate dissociation tests was performed, and the phase equilibrium condition of pore hydrate was determined, providing an effective way to evaluate the unhydrated water content during hydrate dissociation. Meanwhile, a series of direct shear tests was also conducted to explore the shear strength characteristics of the soil. It is shown that the shear strength of the hydrate-bearing soil can be significantly influenced by pore gas pressure, unhydrated water content, hydrate saturation and several other factors. In particular, the measured shear strength depends upon the initial water content of the sample, pointing to a potential problem that the shear strength could be wrongly determined if not properly interpreted. A shear strength criterion, which enforces the equilibrium condition of pore hydrate, is developed for hydrate-bearing soil, establishing a link between the equilibrium condition and the shear strength. The proposed equation describes well the shear strength characteristics of hydrate-bearing soils, remarkably unifying the effects of pore pressure, temperature, water content and hydrate saturation. |
|---|