Model Optimization of Ice Melting of Bridge Pylon Crossbeams with Built-In Carbon Fiber Electric Heating

• Published in: Applied Sciences
• Main Authors: Hao Xu, Zhi Chen, Chunchen Cao, Henglin Xiao, Lifei Zheng
• Format: Article in Journal/Newspaper
• Language: English
• Published: MDPI AG 2024
• Subjects: carbon fiber electric heating; crossbeam; deicing performance; energy utilization; Technology; T; Engineering (General). Civil engineering (General); TA1-2040; Biology (General); QH301-705.5; Physics; QC1-999; Chemistry; QD1-999; Ice Sheet
• Online Access: https://doi.org/10.3390/app14125025; https://doaj.org/article/af0e6c3d07474a69a70466fd316561f0

This paper aims to improve the deicing performance and energy utilization of bridge pylon crossbeams with built-in carbon fiber electric heating (BPB–CFEH). Therefore, a three-dimensional thermal transfer model of BPB–CFEH with one arrangement is established. Two ice-melting regions and two ice-melting stages were set up according to the characteristics of the icing of the crossbeam. The effects of wind speed and ambient temperature on the paving power required to reach the complete melting of the icicles within 8 h were analyzed. The effects of the laying spacing and rated voltage of the carbon fiber heating cable on the melting ice sheet and the thermal exchange of the two regions of the icicle after heating for 8 h were compared. Additionally, its effect on energy utilization of the process from the ice sheet melting stage to the ice column melting stage was analyzed. Ice-melting experiments verified the applicability and reasonableness of the simulated ice-melting calculation formula. The results show that under ambient temperature of −10 °C and wind speed of 4.5–13.5 m/s, the proposed paving power is 817.5–2248.12 W/m 2 . Increasing the rated voltage and shortening the spacing increases the thermal exchange capacity of the two melting regions. The shortening of the spacing improves the energy utilization rate of the melting stage of the ice sheet to the melting stage of the icicle processes. The difference between the melting time obtained from the formula proposed by numerical simulation and the melting time obtained from indoor tests is about 10 min. This study provides a design basis for the electrothermal ice melting of bridge pylon crossbeams.