Alkalinity determination by potentiometry: intercalibration using three different methods
Seawater was sampled from different depths in the North Atlantic Ocean (Canary Islands region) and distributed among three different labs for the determination of titration alkalinity. Analysis was performed by potentiometric methods, involving titration in a closed cell, titration in an open cell a...
| Published in: | Ciencias Marinas |
|---|---|
| Main Authors: | , , , , |
| Format: | Article in Journal/Newspaper |
| Language: | English Spanish |
| Published: |
Universidad Autónoma de Baja California
2000
|
| Subjects: | |
| Online Access: | https://doi.org/10.7773/cm.v26i1.573 https://doaj.org/article/37fc5c78c9df42f782916c58525704a0 |
| Summary: | Seawater was sampled from different depths in the North Atlantic Ocean (Canary Islands region) and distributed among three different labs for the determination of titration alkalinity. Analysis was performed by potentiometric methods, involving titration in a closed cell, titration in an open cell and a two end-point acid addition method. The precision, which is the sample reproducibility taken from the mean standard deviation for replicate measurements, was between 0.45 and 0.90 µmol · kg–1 for the individual labs. Accuracy, here taken as the deviation for the values of a lab from the mean of all three, was mostly below 1 µmol · kg–1 and never exceeded 0.1% of the sample value. Mean standard deviation for all labs and all samples was 0.87 µmol · kg–1, once the individual methods were calibrated using certified reference material (CRM). Without CRM calibration, the mean standard deviation would increase to 2.8 µmol · kg–1. The conclusion is that current high precision methods for alkalinity measurements calibrated with CRMs are able to reach similar accuracy as the measurement of total dissolved inorganic carbon by coulometry and therefore allow for the precise determination of the oceanic carbon dioxide system by using the two measured parameters. |
|---|