Pseudameira mago Karanovic & Cho, 2012, sp. nov.

Pseudameira mago sp. nov. (Figs. 8 & 9) Type locality. South Korea, South Sea, Memuld Island, littoral, depth 33 m, 34.654683 °N 128.593633 °E. Specimens examined. Types only: holotype ovigerous female dissected on one slide (collection number NIBRIV0000232639), one paratype ovigerous female in...

Full description

Bibliographic Details
Main Authors: Karanovic, Tomislav, Cho, Joo-Lae
Format: Text
Language:unknown
Published: Zenodo 2012
Subjects:
Online Access:https://dx.doi.org/10.5281/zenodo.6171003
https://zenodo.org/record/6171003
Description
Summary:Pseudameira mago sp. nov. (Figs. 8 & 9) Type locality. South Korea, South Sea, Memuld Island, littoral, depth 33 m, 34.654683 °N 128.593633 °E. Specimens examined. Types only: holotype ovigerous female dissected on one slide (collection number NIBRIV0000232639), one paratype ovigerous female in toto on slide (collection number NIBRIV000023264040), and one paratype ovigerous female dissected on one slide (collection number NIBRIV0000232641); all collected from type locality, 18 December 2010, temperature 15.1 °C, salinity 33.84 psu, pH 7.54, leg. W. Lee. Etymology. The species name is taken from the Korean totemic and shamanistic mythology, and reffers to a goddess named Mago, one of the first two deities that appeared at the beginning of the world. Although totemic and shamanistic legends play a minor part in the religious landscape in Korea today, their influence is evident in the love and respect most people here show for the nature in general, and Korean mountains especially. The name thus should be treated as a Latin noun (gender feminine) in apposition to the generic name. Description. Female (based on holotype and two paratypes). Total body length, measured from tip of rostrum to posterior margin of caudal rami (excluding appendages and caudal setae), from 412 to 427 μm (412 μm in holotype). Preserved specimen yellowish. Nauplius eye not visible. Body segmentation as in previous two species. Most somite ornamentation also similar to previous species, and presumably homologous pore and sensilla also numbered with same Arabic and Roman numerals (see Fig. 8 A, B) to allow easier comparison. Habitus (Fig. 8 A, B) almost perfectly cylindrical in dorsal view, only gently tappering towards posterior end, slender; podoplean boundary between prosome and urosome almost inconspicuous in dorsal view, but more pronounced in lateral view; prosome/urosome ratio nearly 1.1 and greatest width in dorsal view at posterior end of cephalothorax. Body length/width ratio about 4.8; cephalothorax 1.1 times as wide as genital double-somite. Free pedigerous somites without lateral or dorsal expansions, pleural plates better developed than in previous two species, almost completely covering coxae of swimming legs in lateral view. Integument relatively strongly chitinized, without cuticular windows or pits. Surface ornamentation of somites consists of 62 pairs and five unpaired pores and sensilla (those homologous with previous two species indicated with Arabic and Roman numerals respectively in Fig. 8 A, B, C; those not present in previous species indicated with Greek letters in alphabetical oder from anterior to posterior end of body, and from dorsal to ventral side), and several rows of spinules on urosomites only. Lateral pair of sensilla no. 14 on cephalothorx probably homologous to cuticular pores no. 14 in previous two species. Rostrum small, membranous, linguiform, with relatively blunt tip, reaching 1 / 3 of first antennular segment, about twice as long as wide and not demarcated at base; ornamented with two dorsal sensilla (pair no. 1). Cephalothorax (Fig. 8 A, B) gradually tapering towards anterior end in dorsal view, about 1.2 times as long as wide; represents 24 % of total body length. Surface of cephalic shield without any pores, ornamented with one unpaired dorsal sensillum (no. V) and 23 pairs of long sensilla (nos. 2, 3, 5 –8, 10, 12 –16, 18–20, 24– 26, III, VI, α, β, γ); sensilla 19–26 & VI belong to first pedigerous somite. Second pedigerous somite (first free) without pair of pores antero-laterally, ornamented with seven pairs of long sensilla (nos. 27, 29–31, 33– 35); antero-dorsal pair of sensilla (no. 27) serially homologous to pair no. 19 on first pedigerous somite. Third pedigerous somite also without antero-lateral pair of pores, ornamented with six pairs of long sensilla (nos. 36, 38, 40, 41, 44, 45); anterodorsal pair of sensilla (no. 36) serially homologous to pairs nos. 19 and 27 on previous two pedigerous somites. Fourth pedigerous somite also missing antero-dorsal pair of pores, as in previous two somites, ornamented with six pairs of long posterior sensilla (nos. 47 –50, 52, 53). Hyaline fringes of all prosomites braod and smooth, except on fourth pedigerous somite where fringe relatively narrow dorsally. Fifth pedigerous somite ornamented only with four pairs of posterior sensilla (nos. 54–57); hyaline fringe smooth and narrow. Genital double-somite (Fig. 8 A, B, C) 1.2 times as long as wide (ventral view); internal suture (remnant of segmental fusion) strongly sclerotised, visible dorsolaterally at midlength of somite, furnished with two parallel short rows of strong spinules dorsolaterally, four pairs of sensilla (nos. 59–62), and lateral pair of cuticular pores (no. 63); posterior part of genital double-somite without lateral pores, ornamented with one unpaird ventral pore (no. 66), one dorsal unpaired pore (no. IX), posterior row of large spinules on eash side laterally, and four pairs of posterior sensilla (nos. 67–70); hyaline fringe finely serrated. Genital complex (Fig. 8 C) with single large copulatory pore, strongly sclerotized and wide copulatory duct and two small ovoid seminal receptacles. Single median genital aperture covered by fused reduced sixth legs, represents 55 % of somite’s width. Third urosomite ornamented with posterior row of spinules (interrupted dorsally), unpaired dorsal cuticular pore (no. 71), two pairs of cuticular pores (nos. 73, δ) ventrally and laterally respectively, unpaired dorsal posterior sensillum (no. 74), and three pairs of posterior sensilla (nos. 75–77); hyaline fringe finely serrated. Fourth urosomite ornamented with single pair of lateral cuticular pores (no. ε), and short posterior row of slender spinules ventrally; hyaline fringe finely serrated. Anal somite (Fig. 8 B, C, D) deeply clefted medially (only anterior third of somite not clefted), with transverse internal sclerotised ridge in anterior side which interrupted medially by cleft, ornamented with pair of large dorsal sensilla (no. 81), two pairs of cuticular pores (nos. 80, 85), two parallel ventral anterior rows of slender spinules, ventro-lateral posterior row of spinules at base of each caudal ramus; anal operculum slightly convex, narrow and relatively short, reaching 3 / 4 of anal somite and covering anterior half of medial cleft, represents 33 % of somite's width, smooth; anal sinus ornamented with two parallel diagonal rows of hair-like spinules on each side of median cleft, widely open, with weakly sclerotised walls, and without any chitinous projections. Caudal rami (Fig. 8 B, C, D) short but robust, about as long as anal somite in dorsal view, nearly 1.5 times as long as wide (ventral view), slightly divergent and cylindrical (posterior part slightly narrower), space between rami about 1.8 times one ramus width, without dorsal diagonal suture in anterior half; with seven elements (three lateral, one dorsal and three apical); ornamentation consists of two spinules at base of largest lateral setae, two ventral posterior spinules at base of inner apical seta (outer minute), and two pairs of pores (nos. 87, 88). Dorsal seta relatively short and slender, smooth, inserted on postero-median corner, about 0.8 times as long as caudal ramus, triarticulate at base. Lateral setae all smooth and slender; distalmost seta longest, inserted closer to ventral side and very close to posterior margin, 2.6 times as long as smaller proximal seta, 1.3 times as long as larger proximal seta, and also 1.3 times as long as caudal ramus; proximal lateral setae inserted very close to each other in cuticular depressions similar to those of typical sensilla, inserted very close to dorsal side and posterior margin. Inner apical seta smooth, about 1.2 times as long as ventralmost lateral seta. Middle apical seta strongest, with breaking plane, finely bipinnate at middle third of its length, 1.1 times as long as urosome and twice as long as outer apical seta. Outer apical seta also with breaking plane and strong, finely bipinnate distally. Antennula (Fig. 9 A) six-segmented, joined to cephalotholax with small triangular pseudosegment laterally, approximately half as long as cephalothorax, ornamented with very long spinules along posterior margin of second segment and several small spinules on anterior margin of first segment. Long aesthetasc on fourth segment reaching beyond tip of appendage for length of last four segments combined, wider than in previous two species, fused basally with even longer adjacent seta; slender apical aesthetasc on eighth segment about as long as last three segments combined, fused basally with two apical setae, forming apical acrothek. Setal formula: 1.8. 7.3. 2.14. One seta on second segment, one on third, and three setae on sixth segment pinnate; all other setae smooth. Six lateral setae on sixth segment biarticulated at base (inserted on small pseudojoint); all other setae uniarticulated and without breaking planes. Length ratio of antennular segments, from proximal segment and along caudal margin, 1: 1: 0.3: 0.3: 0.3: 1. Antenna (Fig. 8 E) composed of coxa, allobasis (fused basis and first endopodal segment), one-segmented endopod and one-segmented exopod, although ancestral suture between basis and first endopodal segment visible partly on anterior surface. Coxa short, unarmed and unornamented. Allobasis 2.3 times as long as coxa and about 1.6 times as long as wide, ornamented with several large spinules along inner margin proximally, unarmed. Endopod about three times as long as wide and nearly 1.4 times as long as allobasis, with two surface frills subdistally, armed laterally with two strongly pinnate spines flanking thin seta; apical armature consisting of five geniculate setae, strongest one fused basally to additional smaller seta; smallest seta smooth and slender; strongest seta about 0.8 times as long as longest geniculate seta, ornamented with large spinules around area of geniculation; other geniculate setae smooth and strong; ornamentation consisting of seven extremely large spinules on ventral surface, in groups of two, two, and three. Exopod slightly longer than coxa, with narrow basal part and somewhat wider distal part; unornamented; with one lateral (although inserted close to distal margin) and two apical strong and unipinnate setae; dorsal (outer) apical seta longest, 1.2 times as long as ventral apical seta, about 1.9 times as long as lateral seta, and 1.7 times as long as exopod. Labrum (Fig. 9 B) large compared with cephalothorax, trapezoidal, rigidly sclerotized, with wide and straight cutting edge, ornamented subapically and apically with continuous row of strong spinules. Paragnaths not mounted in satisfactory position to allow independent drawing or proper observation. Mandibula (Fig. 9 C) with narrow cutting edge on elongated coxa, with three bicuspidate strong ventral teeth, two unicuspidate strong teeth, and single dorsal unipinnate seta. Palp uniramous, comprising basis and onesegmented endopod. Basis with slightly inflated distal part, about 2.5 times as long as wide, with single strong and distally unipinnate inner seta, ornamented with longitudinal row of long and slender spinules along dorsal margin. Endopod very small, unornamented, about 0.3 times as long as basis and 1.1 times as long as wide; with five slender and smooth apical setae. Maxillula (Fig. 9 D) with large praecoxa, ornamented with several spinules on outer margin distally; arthrite rectangular, unornamented, with two anterior surface setae, three lateral, and four apical elements (probably three spines and one seta); dorsalmost of apical elements straight and with slender spinules along dorsal margin; ventralmost element smooth and curved; second element from ventral side strongest and longest, with crown of spinules distally; third element from ventral side also very strong, bicuspidate. Coxal endite much shorter than praecoxal arthrite or basis, armed apically (on inner margin) with one stout bipinnate element, and another smooth and slender seta. Basis significantly shorter than praecoxal arthrite but more than twice as long as coxal endite, with four setae apically and subapically; dorsalmost seta bipinnate, others smooth. Endopod represented by minute but distinct segment, with single bipinnate slender seta apically. Maxilla (Fig. 9 E) ornamented with row of long spinules along outer margin of syncoxa, and another shorter row of smaller spinules on anterior surface; opening of maxillary gland clearly visible on posterior surface. Proximal endite of syncoxa well developed, although not strongly sclerotized, with characteristically inflated ventral part; unornamented; with single apical setae, which fused at base to endite, wide, soft, and distally plumose. Distal endite of syncoxa cylindrical, well sclerotised and highly mobile, armed apically with one strong bipinnate seta, and two smooth and sleder setae; smooth setae of subequal length, only slightly longer than pinnate seta, and 2.3 times as long as endite. Basis drawn out into long claw, with shorter spiniform and curved seta at base, ornamented with minute spinules along convex margin. Endopod represented by minute but distinct square segment, with two long and smooth apical setae of subequal length; enopodal setae about 1.5 times as long as basal seta, but all reaching distal tip of basal claw. Maxilliped (Fig. 8 E) with short and stout syncoxa, ornamented with arched row of spinules on inner margin, and with two setae subapically; inner syncoxal seta bipinnate, 1.1 times as long as syncoxa, and 3.2 times as long as outer unipinnate seta. Basis twice as long as wide and 1.1 times as long as syncoxa, unarmed, ornamented with short longitudinal row of slender spinules along inner margin proximally, as well as with two short rows of spinules on outer margin (one at 1 / 3, other at 2 / 3). Endopod represented by long curved claw, about 1.3 times as long as basis, ornamented with row of spinules along concave side distally, accompanied at base by thin smooth and short seta. All swimming legs (Fig. 9 F, G, H, I) of similar size and short in comparison to body length, composed of small triangular and unarmed praecoxa, large rectangular and unarmed coxa, shorter and nearly pentagonal basis, slender three-segmented exopod, also slender and three-segmented endopod; each leg joined to their pair on opposite side of body by simple quadriform intercoxal sclerite. First swimming leg (Fig. 9 F) with smooth and short intercoxal sclerite, its distal margin wide and slightly concave. Praecoxa short and triangular, ornamented with row of small spinules on anterior surface along distal margin. Coxa twice as wide as long, ornamented with long spinules along outer and inner margins, additionally with two short transverse rows of spinules on anterior surface close to outer margin (one proximal and one distal). Basis with one long and not very strong bipinnate spine on outer corner, and one strong spine on inner distal corner, which ornamented with large outer spinules; ornamentation consists of short rows of large spinules at base of each spine, as well as distal row of spinules between exopod and endopod, two rows of slender spinules on inner margin, and cuticular pore on anterior surface close to outer spine. Exopod with all segments of similar length, each about 1.8 times as long as wide and ornamented with spinules along both inner and outer margins (those on outer margin very strong and long, especially on first and second segment); first two segments with single strong and finely bipinnate spine on outer distal corner, each also with setule near distal tip; third segment with three strong and finely bipinnate spines on outer margin (although shorter than those on first and second segment) and two bipinnate setae apically; outer apical seta geniculate and with shorter spinules along outer margin; inner apical seta slender and with long spinules on both margins. Endopod slightly geniculate and 1.1 times as long as exopod; first endopodal segment about as long as first exopodal segment and 1.5 times as long as wide, ornamented with slender spinules along inner margin and strong and long spinules along outer and distal margins, with single inner seta, which about twice as long as segment, slender, and finely unipinnate distally; second segment smallest, about 1.7 times as long as wide and only 0.8 times as long as first segment, ornamented with long an strong spinules along outer and distal margins, and with single slender and bipinnate inner seta; third segment slender, about 4.4 times as long as wide and almost twice as long as second segment, armed apically with three elements; innermost apical element probably spine, strong and 0.9 times as long as third segment, unipinnate along outer margin; middle element slightly more slender and geniculate seta, nearly 2.4 times as long as outer element, bipinntae distally (with smaller spinules along outer margin); innermost element slender bipinnate seta, 1.8 times as long as outer element. Second swimming leg (Fig. 9 G) with intercoxal sclerite ornamented with four strong spinules on anterior surface, its distal margin narrow and concave. Praecoxa small and triangular, ornamented with short row of long spinules on anterior surface along distal margin. Coxa nearly 1.7 times as wide as long, ornamented with transverse row of small spinules on anterior surface proximally, four extremely long spinules on anterior surface distally, and with long spinules along outer margin. Basis with single bipinnate and long but not very strong spine on outer corner; ornamented with spinules at base of spine, as well as with distal row of spinules between exopod and endopod, four extremely long spinules on inner margin, and cuticular pore on anterior surface close to outer spine. Exopod with all segments of about same width, third segment almost twice as long as second segment and 1.6 times as long as first segment; first two segments ornamented with strong spinules along outer margin and single pore on anterior surface at base of outer spine, with inner distall frill, each with outer bipinnate spine and inner bipinnate seta; third segment ornamented with pore near outer distal corner and spinules along outer margin, with three strong and finely bipinnate outer spines, two apical bipinnate setae, and two slender and bipinnate inner setae; outer apical seta very strong (spiniform) with spinules along outer margin much shorter than those along inner margin, about 1.4 times as long as segment, and 2.5 times as long as outer spines; inner apical seta slender, with sparse long spinules on inner side and short sparse spinules on outer side, 1.2 times as long as outer apical seta; inner setae of same length, about 0.7 times as long as third segment. Endopod straight (not geniculate) and 0.9 times as long as exopod, progressively narrower from proximal to distal end, each segment ornamented with single pore on anterior surface close to outer distal corner, and row of strong spinules along outer margin; third segment about 1.6 times as long as first or second; first two segments additionally ornamented with strong frill on inner distal corner, and with single bipinnate inner seta (that on first segment very short and spiniform, curved); third segment with one inner seta, two apical setae and one subapical outermost spine; apical setae of equal length, bipinnate, 0.9 times as long as entire endopod, about as long as inner seta, and nearly 2.7 times as long as outer spine; outer apical seta on third segment w : Published as part of Karanovic, Tomislav & Cho, Joo-Lae, 2012, Three new ameirid harpacticoids from Korea and first record of Proameira simplex (Crustacea: Copepoda: Ameiridae) *, pp. 91-127 in Zootaxa 3368 on pages 110-117, DOI: 10.5281/zenodo.281703 : {"references": ["Genus Pseudameira Sars G. O., 1911", "Walter, T. C. & Boxshall, G. (2011) World Copepoda database. Accessed through: http: // www. marinespecies. org / copepoda / aphia. php? p = taxdetails & id = 115135 on 24 October 2011.", "Lang, K. (1948) Monographie der Harpacticiden, 1 - 2. Nordiska Bokhandeln, Lund, 1682 pp.", "Lang, K. (1965) Copepoda Harpacticoida from the Californian Pacific coast. Kungl. Svenska Vetenskapsakademiens Handlingar, 10, 1 - 560.", "Gee, J. M. & Fleeger, J. W. (1986) Two new species of harpacticoid copepod from the South Orkney Islands, Antarctica, and a redescription of Idyellopsis typica Lang (Tisbidae). Zoological Journal of the Linnean Society, 8, 143 - 165.", "Klie, W. (1950) Harpacticoida (Cop.) aus dem Bereich von Helgoland und der Kieler Bucht. Kieler Meeresforschungen, 7, 76 - 128.", "Shen, C. J. & Bai, S. O. (1956) The marine Copepoda from the spawning ground of Pneumatophorus japonicus (Houttuyn) off Chefoo, China. Acta Zoologica Sinica, 8, 177 - 234. [In Chinese with English summary]"]}