Spectral Reflectance Measurements NIMS grid Barrow, Alaska 2014

Spectral measurements were taken at each meter of the Networked Info-mechanical Systems (NIMS) grid in Barrow, Alaska during the summer of 2014. The NIMS grid is situated about 200 meters to the north east side of the International Tundra Experiment (ITEX) dry sites. Measurements were taken from the...

Full description

Bibliographic Details
Main Author: Oberbauer, Steven
Format: Dataset
Language:English
Published: Arctic Data Center 2014
Subjects:
Online Access:https://dx.doi.org/10.18739/a2v83t
https://arcticdata.io/catalog/view/doi:10.18739/A2V83T
Description
Summary:Spectral measurements were taken at each meter of the Networked Info-mechanical Systems (NIMS) grid in Barrow, Alaska during the summer of 2014. The NIMS grid is situated about 200 meters to the north east side of the International Tundra Experiment (ITEX) dry sites. Measurements were taken from the edge of each white board located at each meter aimed at the plots. The instrumentation used was a Unispec dual channel (DC) spectrometer with fiber optics as sensors. A manfrotto tri-pod with an arm attachment was used to hold the fibers and sensors in place while taking the spectral measurements. The arm had 2 bubble levels to assist in keeping the sensors as level as possible. The calculated foot print cover is about 50-60 cm using a tripod height of 1.62 meters. The sensor angle for each scan is 20 degrees