Temperature before the heating cycle from the sea ice mass balance buoy DTC56 during MOSAiC 2019/2020 ...

Temperature and heating-induced temperature were measured along a chain of thermistors. Digital Thermistor Chain DTC56 is an autonomous instrument that was installed on drifting sea ice in the Arctic Ocean during the MOSAiC expedition on 05 September 2020. The thermistor chain was 2.36 m long and in...

Full description

Bibliographic Details
Main Authors: Salganik, Evgenii, Hoppmann, Mario, Scholz, Daniel
Format: Dataset
Language:English
Published: PANGAEA 2023
Subjects:
autonomous platform
buoy
Ice mass balance
Temperature
DATE/TIME
LATITUDE
LONGITUDE
Position
Temperature, technical
Digital thermistor chain
PS122/5
Polarstern
Multidisciplinary drifting Observatory for the Study of Arctic Climate MOSAiC
albedo
Arctic
Arctic Ocean
Sea ice
Online Access:https://dx.doi.org/10.1594/pangaea.962522
https://doi.pangaea.de/10.1594/PANGAEA.962522
Description
Summary:Temperature and heating-induced temperature were measured along a chain of thermistors. Digital Thermistor Chain DTC56 is an autonomous instrument that was installed on drifting sea ice in the Arctic Ocean during the MOSAiC expedition on 05 September 2020. The thermistor chain was 2.36 m long and included sensors with a regular spacing of 2 cm. The initial ice thickness was 1.09 m, the snow thickness was 0.00 m, and the pond depth was 0.43 m. The resulting time series describes the evolution of temperature during the heating cycle of 20 s and after the heating cycle during the following 40 s as a function of geographic position (GPS), depth, and time between 05 September 2020 and 08 September 2020 in sample intervals of 6 hours. It also contains manually estimated positions of air-snow, snow-ice, and ice-water interfaces. The DTC was installed in the ponded second/multiyear ice next to the Albedo Toblerone Line and autonomous surface flux station ASFS30: doi:10.18739/A2K649V1F. ... : Temperature after the cooling cycle and temperature before the heating cycle both represent in situ temperature. The temperature before the heating cycle may contain errors in measurements and is provided for reference. It is recommended to use temperature after the cooling cycle and temperature difference after the heating cycle for further analysis. ...

Similar Items