Temperature difference after the heating cycle from the sea ice mass balance buoy DTC22 during MOSAiC 2019/2020 ...

Temperature and heating-induced temperature were measured along a chain of thermistors. Digital Thermistor Chain DTC22 is an autonomous instrument that was installed on drifting sea ice in the Arctic Ocean during the MOSAiC expedition on 08 December 2019. The thermistor chain was 4.16 m long and inc...

Full description

Bibliographic Details
Main Authors: Salganik, Evgenii, Hoppmann, Mario, Scholz, Daniel, Demir, Oguz, Hendricks, Stefan, Spreen, Gunnar
Format: Dataset
Language:English
Published: PANGAEA 2023
Subjects:
autonomous platform
buoy
Ice mass balance
Temperature
DATE/TIME
LATITUDE
LONGITUDE
Position
Temperature, difference
Digital thermistor chain
PS122/1
PS122/3
Polarstern
Multidisciplinary drifting Observatory for the Study of Arctic Climate MOSAiC
Arctic
Arctic Ocean
Sea ice
Online Access:https://dx.doi.org/10.1594/pangaea.962472
https://doi.pangaea.de/10.1594/PANGAEA.962472
Description
Summary:Temperature and heating-induced temperature were measured along a chain of thermistors. Digital Thermistor Chain DTC22 is an autonomous instrument that was installed on drifting sea ice in the Arctic Ocean during the MOSAiC expedition on 08 December 2019. The thermistor chain was 4.16 m long and included sensors with a regular spacing of 2 cm. The resulting time series describes the evolution of temperature during the heating cycle of 20 s and after the heating cycle during the following 40 s as a function of geographic position (GPS), depth, and time between 08 December 2019 and 12 May 2020 in sample intervals of 6 hours. It also contains manually estimated positions of air-snow, snow-ice, and ice-water interfaces. The DTC was installed in the undeformed second-year ice ridge next to RV Polarstern, remote sensing site RS2 and L-band scatterometer. ... : Temperature after the cooling cycle and temperature before the heating cycle both represent in situ temperature. The temperature before the heating cycle may contain errors in measurements and is provided for reference. It is recommended to use temperature after the cooling cycle and temperature difference after the heating cycle for further analysis. ...

Similar Items