The sheet of impact melt at West Clearwater Lake, Northern Quebec

The meteorite impact that formed the 32-km-wide Upper Pennsylvanian (285 ± 23 Ma) West Clearwater structure, situated about 125 km east of the Hudson Bay arc, northern Quebec, formed a sheet of impact melt now exposed on a central ring of islands. Crater-fill deposits exposed on the ring of islands...

Full description

Bibliographic Details
Main Author: Rosa, Daniel
Other Authors: Robert F Martin (Internal/Supervisor)
Format: Thesis
Language:English
Published: McGill University 2012
Subjects:
Online Access:http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=107581
Description
Summary:The meteorite impact that formed the 32-km-wide Upper Pennsylvanian (285 ± 23 Ma) West Clearwater structure, situated about 125 km east of the Hudson Bay arc, northern Quebec, formed a sheet of impact melt now exposed on a central ring of islands. Crater-fill deposits exposed on the ring of islands can be divided into three major successive units, which are, in ascending order: 1) a red, friable impact-melt-bearing fragmental breccia 0 to 20 m thick cut by small (cm to dm) dykes of impact melt; 2) a red, massive, clast-rich impact-generated melt about 18 meters thick containing up to 25% clasts > 1 mm in size, and 3) a massive poorly jointed clast-poor impact-generated melt containing <15% clasts greater than 1 mm in size, at least 85 m thick, with a matrix that shows an ophitic to subophitic texture. The average composition of the West Clearwater Lake impact melt, which has a bulk composition similar to that of a trachyandesitic volcanic rock, can be modeled by mixing the average chemical compositions of three types of lithologies present in the vicinity of the impact structure: 1) granitic rocks, 2) granodioritic, enderbitic and tonalitic rocks, and 3) mafic and ultramafic rocks, according to the following proportions: 1) 31%, 2) 62% and 3) 6%. The order of crystallization of the melt was plagioclase + Fe-Ti oxides + clinopyroxene + sanidine + apatite + quartz. The initial clast content in the clast-poor melt, before the onset of crystallization, must have been much higher. This conclusion is supported by the widespread occurrence in the clast-poor impact melt rock of plagioclase grains with an irregular, partially resorbed relict core. In thin section, plagioclase xenocrysts now form ~5% to ~15% of the clast-poor impact melt rock, depending on the thin section. The preferential preservation of plagioclase as a clast implies that the melt quickly equilibrated to temperatures below the liquidus and within the range of plagioclase crystallization. Two-feldspar thermometry calculations suggest that the last plagioclase and the first alkali feldspar crystallized at temperatures of about 781 to 816°C (±44°C). Quartz, the last phase to crystallize in the clast-poor impact melt rock, formed at temperatures of 700 to 730°C, with an activity of Ti in quartz between 0.5 and 0.6. This study is the first to employ Ti-in-quartz geothermometry to estimate the temperature of solidification of a melt sheet created by a meteoritic impact. Because the melt crystallized anhydrous minerals, it is possible that the melt was highly undersaturated at the liquidus but had achieved H2O saturation at the solidus. Le cratère du Lac à l'Eau Claire Ouest, une structure de 32 km de diamètre, a été formé pendant le Pennsylvanien supérieur, il y a 285 ± 23 Ma; il se trouve environ 125 km à l'est de l'arc de la Baie d'Hudson. L'impact météoritique à l'origine de ce cratère a produit une nappe de magma, et les roches qui en résultent se trouvent maintenant exposées dans un anneau d'îles occupant le centre du cratère. Ces roches peuvent être divisées en trois unités, qui sont, en ordre ascendant, 1) une brèche de base rougeâtre et friable (0 – 20 m d'épaisseur) infiltrée par d'étroits dykes d'impactite, 2) une ignimbrite d'impacte rougeâtre massive, épaisse de 18 m, contenant jusqu'à 25% de débris clastiques > 1 mm, et 3) une impactite massive épaisse d'au moins 85 m, pauvre en débris clastiques (<15%), montrant une matrice de texture ophitique à sub-ophitique. La composition moyenne trachyandésitique du magma d'impact à l'Eau Claire Ouest peut être modélisée en mélangeant trois unités présentes dans le voisinage immédiat du cratère: 1) 31% granites, 2) 62% granodiorites, enderbites et tonalites, et 3) 6% roches mafiques et ultramafiques. La cristallisation de l'impactite a suivi la séquence plagioclase + oxydes de Fe-Ti + clinopyroxène + sanidine + apatite + quartz. La quantité de débris clastiques présente dans l'impactite avant le début de la cristallisation était plus élevée que celle qui est maintenant observée, ce que confirme la présence dans l'impactite de nombreux grains de plagioclase ayant des noyaux composés de xénocristaux partiellement résorbés. Ces xénocristaux forment présentement ~5% à 15% de l'impactite. La préservation de ces xénocristaux suggère que le refroidissement du magma a été rapide des températures en dessous du liquidus plaçant le magma en équilibre avec les températures de cristallisation du plagioclase ont dû être rapidement atteintes. Des calculs de thermométrie fondée sue la coexistence de deux feldspaths indiquent que le dernier plagioclase et le premier feldspath potassique ont cristallisé à 781 - 816°C (±44°C). Le quartz, dernier minéral à cristalliser, s'est formé à 700 - 730°C; l'activité du Ti dans le quartz a été estimée à 0.5 - 0.6. Dans cette étude, la géothermométrie du Ti dans le quartz a été employée pour la première fois pour estimer la température de cristallisation d'un magma créé par un impact météoritique. Parce que le magma a cristallisé des minéraux anhydres, il est probable que le magma était fortement sous saturé en H2O au liquidus, mais avait atteint saturation en H2O au solidus.