Summary: | Maintenance and Update Frequency: asNeeded Statement: Original field data. Data processing and quality control: Performed by Vito Dirita NCMI DAP Group. Note that 1min average data are provided as a special request, however it is unedited and have data quality implications. For general use, the 5min average data (os150nb.nc) should be used. Credit ADCP data processed by Vito Dirita (CSIRO NCMI, MNF Data Acquisition and Processing group). Credit These data were collected on the Marine National Facility (MNF) RV Investigator voyage IN2021_E03 Credit The MNF must be acknowledged in all outputs derived from Data and/or Samples collected by, or with support from, the MNF. Acknowledge the MNF in outputs with the statement: “We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353 ) in undertaking this research.” Acknowledgment and citations should be in all forms of publication including presentations (where the acknowledgement should be on the closing slide), journals, books, reports and related research outputs. This record describes the Acoustic Doppler Current Profiler (ADCP) data collected from the Marine National Facility RV Investigator voyage IN2021_E03, titled: "Equipment Trials and Calibrations 2021". The voyage took place between December 1 and December 8, 2021, departing from Hobart (TAS) and returning to Hobart (TAS). Both the RDI Ocean Surveyor 150kHz ADCP and the RDI Ocean Surveyor 75kHz ADCP were run in narrowband. Internal triggering was used. The drop keel was at 2m below the waterline for the duration of the voyage. See the voyage computing and electronics report for more details regarding data acquisition The University of Hawaii’s CODAS software codas_focal_20.04_vbox64.ova was used for processing. See the voyage computing and electronics report for more details regarding data acquisition. This dataset was processed (quality-controlled), and then archived by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC).
|