RV Investigator Voyage IN2021_V01 CTD Data

Maintenance and Update Frequency: asNeeded Statement: Original field data. Data processing and quality control by the Marine National Facility Data Acquisition and Processing Group (DAP). Data were processed using the new CapPro system. Data archived by CSIRO NCMI - IDC. Note: after publication it w...

Full description

Bibliographic Details
Other Authors: CSIRO (hasAssociationWith), CSIRO O&A, Information & Data Centre (pointOfContact), CSIRO Oceans & Atmosphere - Hobart (hasAssociationWith), CSIRO/Oceans and Atmosphere (hasAssociationWith), Data Officer (AR), Hobart (processor), Dirita, Vito (metadataContact), Dirita, Vito (originator)
Format: Dataset
Language:unknown
Published: Australian Ocean Data Network
Subjects:
TAS
CTD
Online Access:https://researchdata.edu.au/rv-investigator-voyage-ctd-data/1882410
Description
Summary:Maintenance and Update Frequency: asNeeded Statement: Original field data. Data processing and quality control by the Marine National Facility Data Acquisition and Processing Group (DAP). Data were processed using the new CapPro system. Data archived by CSIRO NCMI - IDC. Note: after publication it was discovered that the SBE11 (deck box) had an incorrect configuration resulting in a misalignment of conductivity sensor data. The data were reprocessed and republished on 03/11/2021. Credit CTD data processed by Francis Chui (CSIRO NCMI). This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2021_V01, titled: "Quantifying krill abundance for krill monitoring and management off the Australian Antarctic Territory." The voyage took place between January 29 and March 25, 2021 departing from Hobart (TAS) and arriving in Hobart. Data for 66 deployments were acquired using the Sea-Bird SBE911 CTD 24, fitted with 31 twelve litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO -supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. The final conductivity calibration was based on a single deployment grouping. The final calibration from the secondary sensor had a standard deviation (SD) of 0.0013390 PSU, well within our target of ‘better than 0.002 PSU’. The standard product of 1 decibar binned averaged were produced using data from the secondary sensors. The dissolved oxygen data calibration fit had a SD of 0.83871 μM. The agreement between the CTD and bottle data was good. Transmissometer, Wetlabs FLBBRTD, Altimeter and Wetlabs FLCDRTD were also installed on the auxiliary A/D channels of the CTD. The collected data were subsequently processed and archived within the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre ...