Spectral Reflectance Measurements ARCSS grid Atqasuk, Alaska 2010

Spectral measurements were taken on a 30 plot subset within the Arctic System Science (ARCSS) grid in Atqasuk, Alaska during the summer of 2010. Spectral measurements were taken from the north eastern most corner of each plot. The subset is located from E2-E6 & J2-J6 with the 1 km^2 ARCSS grid....

Full description

Bibliographic Details
Main Author: Sergio Vargas
Format: Dataset
Language:unknown
Published: Arctic Data Center 2011
Subjects:
Online Access:https://doi.org/10.18739/A2C63S
Description
Summary:Spectral measurements were taken on a 30 plot subset within the Arctic System Science (ARCSS) grid in Atqasuk, Alaska during the summer of 2010. Spectral measurements were taken from the north eastern most corner of each plot. The subset is located from E2-E6 & J2-J6 with the 1 km^2 ARCSS grid. The instrumentation used was a Unispec dual channel (DC) spectrometer with fiber optics as sensors. A manfrotto tri-pod with an arm attachment was used to hold the fibers and sensors in place while taking the spectral measurements. The arm had 2 bubble levels to assist in keeping the sensors as level as possible. The calculated foot print cover is about 50-60 cm using a tri-pod height of 1.62 meters. The sensor angle for each scan is 20 degrees. Extra reference scans were taken on a 100 percent reflective white board surface. Some plots contain crosshairs that are used for point framing purposes and might have an effect on the reflectivity of each scan. Therefore, an extra scan was taken adjacent to each plot on the west side.