Micromechanical characterisation of overburden shales in the Horn River Basin through nanoindentation
Abstract The paper presents a micromechanical characterisation of Fort Simpson shale, which overlies unconventional gas-producing lithologies in the Horn River Basin, NW Canada. The Fort Simpson formation is clay-rich and microseismic data recorded during hydraulic fracturing events in the underlyin...
Published in: | IOP Conference Series: Earth and Environmental Science |
---|---|
Main Authors: | , , , , |
Format: | Article in Journal/Newspaper |
Language: | unknown |
Published: |
IOP Publishing
2023
|
Subjects: | |
Online Access: | http://dx.doi.org/10.1088/1755-1315/1124/1/012087 https://iopscience.iop.org/article/10.1088/1755-1315/1124/1/012087 https://iopscience.iop.org/article/10.1088/1755-1315/1124/1/012087/pdf |
Summary: | Abstract The paper presents a micromechanical characterisation of Fort Simpson shale, which overlies unconventional gas-producing lithologies in the Horn River Basin, NW Canada. The Fort Simpson formation is clay-rich and microseismic data recorded during hydraulic fracturing events in the underlying reservoir has shown the formation acts as a barrier to fracture development, with a notably anisotropic seismic response. Samples were prepared from core fragments and the composition and texture of the shale was characterised using X-ray diffraction, mercury injection porosimetry and scanning electron microscopy (SEM). Nanoindentation testing was used to obtain the mechanical response of the shale microstructure, at grain-scale. The indentation was conducted on a grid pattern and samples were oriented both parallel and perpendicular to the bedding plane to assess the inherent mechanical anisotropy. Chemical analysis of the grids was also undertaken through SEM/EDS (energy dispersive X-ray spectroscopy) and the coupled chemo-mechanical data was used to characterise the material phases of the shale through a statistical clustering procedure. The results show that Fort Simpson shale broadly consists of a soft clay phase, with strongly anisotropic elastic stiffness, and stiffer but effectively isotropic grains of quartz and feldspar. A simple upscaling scheme was also applied to link the grain-scale elastic stiffness to the field-scale microseismic data. |
---|