Calculations of Avalanche Friction Coefficients from Field Data
Abstract The friction coefficients needed to solve Voellmy’s avalanche-dynamics equations and as input to the numerical, finite-difference computer program AVALNCH are calculated from case studies. The following coefficients of internal friction v and of surface friction f worked well for program AV...
| Published in: | Journal of Glaciology |
|---|---|
| Main Authors: | , , |
| Format: | Article in Journal/Newspaper |
| Language: | English |
| Published: |
Cambridge University Press (CUP)
1980
|
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1017/s0022143000010650 https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0022143000010650 |
| Summary: | Abstract The friction coefficients needed to solve Voellmy’s avalanche-dynamics equations and as input to the numerical, finite-difference computer program AVALNCH are calculated from case studies. The following coefficients of internal friction v and of surface friction f worked well for program AVALNCH: for midwinter dry snow v = 0.5 to 0.55 m 2 /s and f = 0.5 to 0.55; for hard slab v = 0.7 to 0.8 m 2 /s and f = 0.7 to 0.8; for fresh, soft slab v = 0.4 to 0.5 m 2 /s and f = 0.4 to 0.5. The program predicted run-out distance well for a variety of conditions but performed less well in cases of sharp, adverse grade in the run-out zone. For the Voellmy approach, large design-size avalanches required turbulent friction coefficients ξ of 1200 to 1600 m/s 2 and kinetic friction coefficients of 0.15. Two hard-slab avalanches, a slow-moving,wet-slab avalanche, and a soft-slab avalanche that ran through scattered mature timber required ξ of 700 to800 m/s 2 and μ of 5/V when V is velocity in m/s. The coefficient of sliding friction for a hard-slab avalanchethat encountered damp snow in the run-out zone was computed directly from movies to be 0.35, 0.43, and 0.32 for three measured sections of the run-out zone. |
|---|