Summary: | This report describes MT-inversion techniques with external constraints, Deliverable D5.6 within the IMAGE project. Report analysing the results of MT-inversion techniques with external contraints, describing optimal MT layout and data modelling for obtaining maximum information from MT surveys, including recommendations for opitmised MT site spacing for different a-priori constraints. The first part of the report, which was performed by ISOR, discusses the origin and nature of the static shifts and some tested methods for static shift correction, i.e. joint 1D inversion of co-located TEM and MT and spatial filtering and statistical assumptions about the shifts. A software is introduced which inverts the two datasets for both the resistivity model and the shift of the MT. Besides determining the static shift, joint inversion is an important quality check of the TEM and MT data sets, i.e. weather they are compatible. In EM surveying, software should be used make a preliminary joint inversion of TEM and MT at base camp as a quality control to make sure the field mission is not terminated until god quality data have been collected. Finally, the claim that 3D inversion of MT can deal with the static shifts, i.e. introduce shallow resistivity structures (not resolved by the data) to account for the shifts is tested. The second part was done by ISOR. On one hand the depth-location of a low-resistivity anomaly, as observed from borehole data, is build into the starting model, giving the program a headstart into gaining information on the resistivity in the survey area and on the other hand information on the ductile-brittle bounday location is used to infer the location of a deep low-resistivity anomaly, which is put into the starting model of the inversion. Several tests have been done on the site spacing in MT for 3D inversion.n This was done for MT data from the Hengill area in SW-Iceland, starting with a measurment and model grid of 1 km by 1 km (see, Árnason et al., 2010). Later a measurement and model grid seize ...
|