Quantitative localized proton-promoted dissolution kinetics of calcite using scanning electrochemical microscopy (SECM)

• Published in: The Journal of Physical Chemistry C
• Main Authors: McGeouch, Carrie-Anne, Peruffo, Massimo, Edwards, Martin A., Bindley, Lucy A., Lazenby, Robert A., Mbogoro, Michael M., McKelvey, Kim M. (Kim Martin), Unwin, Patrick R.
• Format: Article in Journal/Newspaper
• Language: unknown
• Published: American Chemical Society 2012
• Subjects: QD Chemistry; Iceland
• Online Access: http://wrap.warwick.ac.uk/54252/; http://wrap.warwick.ac.uk/54252/1/WRAP_McGeouch,%20J%20Phys%20Chem%20C,%202012.pdf; https://doi.org/10.1021/jp301382e

Scanning electrochemical microscopy (SECM) has been used to determine quantitatively the kinetics of proton-promoted dissolution of the calcite (101̅4) cleavage surface (from natural “Iceland Spar”) at the microscopic scale. By working under conditions where the probe size is much less than the characteristic dislocation spacing (as revealed from etching), it has been possible to measure kinetics mainly in regions of the surface which are free from dislocations, for the first time. To clearly reveal the locations of measurements, studies focused on cleaved “mirror” surfaces, where one of the two faces produced by cleavage was etched freely to reveal defects intersecting the surface, while the other (mirror) face was etched locally (and quantitatively) using SECM to generate high proton fluxes with a 25 μm diameter Pt disk ultramicroelectrode (UME) positioned at a defined (known) distance from a crystal surface. The etch pits formed at various etch times were measured using white light interferometry to ascertain pit dimensions. To determine quantitative dissolution kinetics, a moving boundary finite element model was formulated in which experimental time-dependent pit expansion data formed the input for simulations, from which solution and interfacial concentrations of key chemical species, and interfacial fluxes, could then be determined and visualized. This novel analysis allowed the rate constant for proton attack on calcite, and the order of the reaction with respect to the interfacial proton concentration, to be determined unambiguously. The process was found to be first order in terms of interfacial proton concentration with a rate constant k = 6.3 (± 1.3) × 10–4 m s–1. Significantly, this value is similar to previous macroscopic rate measurements of calcite dissolution which averaged over large areas and many dislocation sites, and where such sites provided a continuous source of steps for dissolution. Since the local measurements reported herein are mainly made in regions without dislocations, this study demonstrates that dislocations and steps that arise from such sites are not needed for fast proton-promoted calcite dissolution. Other sites, such as point defects, which are naturally abundant in calcite, are likely to be key reaction sites.