Fast changeovers using AIV and a tool platform
Fast changeover is changing from one process or machine to another line, process, or machine to produce different products or services. Lean aims at reducing waste, improving productivity, and eliminating non-value-added activities to the customer. Whilst achieving sustained continual improvement in...
Main Author: | |
---|---|
Format: | Master Thesis |
Language: | English |
Published: |
UiT Norges arktiske universitet
2021
|
Subjects: | |
Online Access: | https://hdl.handle.net/10037/23358 |
id |
ftunivtroemsoe:oai:munin.uit.no:10037/23358 |
---|---|
record_format |
openpolar |
spelling |
ftunivtroemsoe:oai:munin.uit.no:10037/23358 2023-05-15T17:14:08+02:00 Fast changeovers using AIV and a tool platform Omosanya, Hafeez Abolade Olav 2021-05-18 https://hdl.handle.net/10037/23358 eng eng UiT Norges arktiske universitet UiT The Arctic University of Norway https://hdl.handle.net/10037/23358 openAccess Copyright 2021 The Author(s) Production Management and Logistics Keywords: Fast changeover Lean Manufacturing AIV (Automated Intelligent Vehicle) MiR100 Simul8 VDP::Technology: 500::Mechanical engineering: 570::Production and maintenance engineering: 572 VDP::Teknologi: 500::Maskinfag: 570::Produksjon og driftsteknologi: 572 INE-3900 Master thesis Mastergradsoppgave 2021 ftunivtroemsoe 2021-12-15T23:55:29Z Fast changeover is changing from one process or machine to another line, process, or machine to produce different products or services. Lean aims at reducing waste, improving productivity, and eliminating non-value-added activities to the customer. Whilst achieving sustained continual improvement in certain activities and process of an organization. This project focuses on implementing the methodologies used in lean to improve a manufacturing process that has a changeover, and integrate an AIV (Automated Intelligent Vehicle) with a tool platform or top module into the same process. After careful literature review and research, I was able to set up a process in the machining laboratory of ‘UiT Universitet i Norge, Narvik,’ that is of value to a customer. I identified the step with the need of a fast tool change and optimized the entire process using a software called Simul8. After running the simulation for a period of two weeks and doing some analysis for the processes, I achieved an optimal solution that ensures that all bottlenecks and buffers were eliminated. I also conducted a smooth flow of the process, improving productivity, efficiency, and reduction in changeover time. Master Thesis Narvik Narvik University of Tromsø: Munin Open Research Archive Narvik ENVELOPE(17.427,17.427,68.438,68.438) |
institution |
Open Polar |
collection |
University of Tromsø: Munin Open Research Archive |
op_collection_id |
ftunivtroemsoe |
language |
English |
topic |
Production Management and Logistics Keywords: Fast changeover Lean Manufacturing AIV (Automated Intelligent Vehicle) MiR100 Simul8 VDP::Technology: 500::Mechanical engineering: 570::Production and maintenance engineering: 572 VDP::Teknologi: 500::Maskinfag: 570::Produksjon og driftsteknologi: 572 INE-3900 |
spellingShingle |
Production Management and Logistics Keywords: Fast changeover Lean Manufacturing AIV (Automated Intelligent Vehicle) MiR100 Simul8 VDP::Technology: 500::Mechanical engineering: 570::Production and maintenance engineering: 572 VDP::Teknologi: 500::Maskinfag: 570::Produksjon og driftsteknologi: 572 INE-3900 Omosanya, Hafeez Abolade Olav Fast changeovers using AIV and a tool platform |
topic_facet |
Production Management and Logistics Keywords: Fast changeover Lean Manufacturing AIV (Automated Intelligent Vehicle) MiR100 Simul8 VDP::Technology: 500::Mechanical engineering: 570::Production and maintenance engineering: 572 VDP::Teknologi: 500::Maskinfag: 570::Produksjon og driftsteknologi: 572 INE-3900 |
description |
Fast changeover is changing from one process or machine to another line, process, or machine to produce different products or services. Lean aims at reducing waste, improving productivity, and eliminating non-value-added activities to the customer. Whilst achieving sustained continual improvement in certain activities and process of an organization. This project focuses on implementing the methodologies used in lean to improve a manufacturing process that has a changeover, and integrate an AIV (Automated Intelligent Vehicle) with a tool platform or top module into the same process. After careful literature review and research, I was able to set up a process in the machining laboratory of ‘UiT Universitet i Norge, Narvik,’ that is of value to a customer. I identified the step with the need of a fast tool change and optimized the entire process using a software called Simul8. After running the simulation for a period of two weeks and doing some analysis for the processes, I achieved an optimal solution that ensures that all bottlenecks and buffers were eliminated. I also conducted a smooth flow of the process, improving productivity, efficiency, and reduction in changeover time. |
format |
Master Thesis |
author |
Omosanya, Hafeez Abolade Olav |
author_facet |
Omosanya, Hafeez Abolade Olav |
author_sort |
Omosanya, Hafeez Abolade Olav |
title |
Fast changeovers using AIV and a tool platform |
title_short |
Fast changeovers using AIV and a tool platform |
title_full |
Fast changeovers using AIV and a tool platform |
title_fullStr |
Fast changeovers using AIV and a tool platform |
title_full_unstemmed |
Fast changeovers using AIV and a tool platform |
title_sort |
fast changeovers using aiv and a tool platform |
publisher |
UiT Norges arktiske universitet |
publishDate |
2021 |
url |
https://hdl.handle.net/10037/23358 |
long_lat |
ENVELOPE(17.427,17.427,68.438,68.438) |
geographic |
Narvik |
geographic_facet |
Narvik |
genre |
Narvik Narvik |
genre_facet |
Narvik Narvik |
op_relation |
https://hdl.handle.net/10037/23358 |
op_rights |
openAccess Copyright 2021 The Author(s) |
_version_ |
1766071420926820352 |