Roach Infestation Optimization MPPT Algorithm of PV Systems for Adaptive to Fast-Changing Irradiation and Partial Shading Conditions

• Main Author: Ntiakoh, Nicholas Kakra
• Format: Master Thesis
• Language: English
• Published: UiT Norges arktiske universitet 2021
• Subjects: Boost converter; Non-isolated DC-DC converter; Maximum power point tracking (MPPT); Partial shading condition (PCS); Population-based Optimization; Roach Infestation Optimization (RIO); Solar Photovoltaic (PV); VDP::Technology: 500::Electrotechnical disciplines: 540::Electrical power engineering: 542; VDP::Teknologi: 500::Elektrotekniske fag: 540::Elkraft: 542; ELE-3900; Arctic; Norway; Arctic University of Norway; UiT The Arctic University of Norway
• Online Access: https://hdl.handle.net/10037/23345

Of all the renewable energy sources, solar photovoltaic (PV) power is considered to be a popular source owing to several advantages such as its free availability, absence of rotating parts, integration to building such as roof tops and less maintenance cost. The nonlinear current–voltage (I–V) characteristics and power generated from a PV array primarily depends on solar insolation/irradiation and panel temperature. The power output depends on the accuracy with which the nonlinear power–voltage (P–V) characteristics curve is traced by the maximum power point tracking (MPPT) controller. A DC-DC converter is commonly used in PV systems as an interface between the PV panel and the load, allowing the follow-up of the maximum power point (MPP). The objective of an efficient MPPT controller is to meet the following characteristics such as accuracy, robustness and faster tracking speed under partial shading conditions (PSCs) and climatic variations. To realize these objectives, numerous traditional techniques to artificial intelligence and bio-inspired techniques/algorithms have been recommended. Each technique has its own advantage and disadvantage. In view of that, in this thesis, a bio-inspired roach infestation optimization (RIO) algorithm is proposed to extract the maximum power from the PV system (PVS). In addition, the mathematical formulations and operation of the boost converter is investigated. To validate the effectiveness of the proposed RIO MPPT algorithm, MATLAB/Simulink simulations are carried out under varying environmental conditions, for example step changes in solar irradiance, and partial shading of the PV array. The obtained results are examined and compared with the particle swam optimization (PSO). The results demonstrated that the RIO MPPT performs remarkably in tracking with high accuracy as PSO based MPPT. Last but not the least, I am very grateful to the Arctic Centre for Sustainable Energy (ARC), UiT The Arctic University of Norway, Norway for providing an environment to do