ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU
Cilj ovog završnog rada bio je analizirati promjenu tlaka i polja brzina restriktora koristeći komercijalni softver ili softver otvorenog koda. Krenuvši od 3D CAD modela restriktora računali smo parametre protoka zraka ovisne o samim dimenzijama restriktora te o postavljenim graničnim uvjetima. Dalj...
Main Author: | |
---|---|
Other Authors: | , |
Format: | Bachelor Thesis |
Language: | Croatian |
Published: |
Sveučilište u Rijeci. Tehnički fakultet.
2023
|
Subjects: | |
Online Access: | https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991 https://urn.nsk.hr/urn:nbn:hr:190:638837 https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991/datastream/PDF |
id |
ftunivrijeka:oai:www.unirepository.svkri.uniri.hr:riteh_3991 |
---|---|
record_format |
openpolar |
spelling |
ftunivrijeka:oai:www.unirepository.svkri.uniri.hr:riteh_3991 2024-02-11T10:08:22+01:00 ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU ANALYSIS OF FLUID FLOW IN AN AUTOMOBILE ENGINE Klapčić, Robert Kranjčević, Lado Bukovac, Ozren 2023-09-15 application/pdf https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991 https://urn.nsk.hr/urn:nbn:hr:190:638837 https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991/datastream/PDF hrv hrv Sveučilište u Rijeci. Tehnički fakultet. University of Rijeka. Faculty of Engineering. https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991 https://urn.nsk.hr/urn:nbn:hr:190:638837 https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991/datastream/PDF http://creativecommons.org/licenses/by/4.0/ info:eu-repo/semantics/openAccess TEHNIČKE ZNANOSTI. Strojarstvo TECHNICAL SCIENCES. Mechanical Engineering restriktor ANSYS strujanje numerička analiza softver motor restrictor flow numerical analysis software engine info:eu-repo/semantics/bachelorThesis text 2023 ftunivrijeka 2024-01-25T17:46:29Z Cilj ovog završnog rada bio je analizirati promjenu tlaka i polja brzina restriktora koristeći komercijalni softver ili softver otvorenog koda. Krenuvši od 3D CAD modela restriktora računali smo parametre protoka zraka ovisne o samim dimenzijama restriktora te o postavljenim graničnim uvjetima. Daljnjom analizom i manipulacijom geometrije CAD modela dobili smo negativ koji nam je bio baza za numeričku analizu u ANSYS softveru. Končano, obavljenom analizom dobili smo grafičke prikaze promjene tlakova i polja brzina iz kojih se može uvidjeti ponašanje zraka koji struji kroz sami restrikor. This final project's goal was to use either commercial or open-source software to analyse the restrictor's pressure change and velocity field. We determined the airflow characteristics based on the restrictor's dimensions and predetermined boundary conditions starting with a 3D CAD model of the restrictor. We created a mesh that served as the foundation for the numerical analysis in the ANSYS programme by doing additional analysis and geometric modification on the CAD model. Finally, we were able to see how the airflow behaved as it passed through the restrictor thanks to the graphical representations of pressure changes and velocity fields that the analysis had produced. Bachelor Thesis sami Repository of the University of Rijeka Baza ENVELOPE(159.950,159.950,53.217,53.217) Koda ENVELOPE(41.488,41.488,63.100,63.100) Protoka ENVELOPE(144.254,144.254,59.381,59.381) |
institution |
Open Polar |
collection |
Repository of the University of Rijeka |
op_collection_id |
ftunivrijeka |
language |
Croatian |
topic |
TEHNIČKE ZNANOSTI. Strojarstvo TECHNICAL SCIENCES. Mechanical Engineering restriktor ANSYS strujanje numerička analiza softver motor restrictor flow numerical analysis software engine |
spellingShingle |
TEHNIČKE ZNANOSTI. Strojarstvo TECHNICAL SCIENCES. Mechanical Engineering restriktor ANSYS strujanje numerička analiza softver motor restrictor flow numerical analysis software engine Klapčić, Robert ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU |
topic_facet |
TEHNIČKE ZNANOSTI. Strojarstvo TECHNICAL SCIENCES. Mechanical Engineering restriktor ANSYS strujanje numerička analiza softver motor restrictor flow numerical analysis software engine |
description |
Cilj ovog završnog rada bio je analizirati promjenu tlaka i polja brzina restriktora koristeći komercijalni softver ili softver otvorenog koda. Krenuvši od 3D CAD modela restriktora računali smo parametre protoka zraka ovisne o samim dimenzijama restriktora te o postavljenim graničnim uvjetima. Daljnjom analizom i manipulacijom geometrije CAD modela dobili smo negativ koji nam je bio baza za numeričku analizu u ANSYS softveru. Končano, obavljenom analizom dobili smo grafičke prikaze promjene tlakova i polja brzina iz kojih se može uvidjeti ponašanje zraka koji struji kroz sami restrikor. This final project's goal was to use either commercial or open-source software to analyse the restrictor's pressure change and velocity field. We determined the airflow characteristics based on the restrictor's dimensions and predetermined boundary conditions starting with a 3D CAD model of the restrictor. We created a mesh that served as the foundation for the numerical analysis in the ANSYS programme by doing additional analysis and geometric modification on the CAD model. Finally, we were able to see how the airflow behaved as it passed through the restrictor thanks to the graphical representations of pressure changes and velocity fields that the analysis had produced. |
author2 |
Kranjčević, Lado Bukovac, Ozren |
format |
Bachelor Thesis |
author |
Klapčić, Robert |
author_facet |
Klapčić, Robert |
author_sort |
Klapčić, Robert |
title |
ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU |
title_short |
ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU |
title_full |
ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU |
title_fullStr |
ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU |
title_full_unstemmed |
ANALIZA STRUJANJA FLUIDA U AUTOMOBILSKOM MOTORU |
title_sort |
analiza strujanja fluida u automobilskom motoru |
publisher |
Sveučilište u Rijeci. Tehnički fakultet. |
publishDate |
2023 |
url |
https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991 https://urn.nsk.hr/urn:nbn:hr:190:638837 https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991/datastream/PDF |
long_lat |
ENVELOPE(159.950,159.950,53.217,53.217) ENVELOPE(41.488,41.488,63.100,63.100) ENVELOPE(144.254,144.254,59.381,59.381) |
geographic |
Baza Koda Protoka |
geographic_facet |
Baza Koda Protoka |
genre |
sami |
genre_facet |
sami |
op_relation |
https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991 https://urn.nsk.hr/urn:nbn:hr:190:638837 https://www.unirepository.svkri.uniri.hr/islandora/object/riteh:3991/datastream/PDF |
op_rights |
http://creativecommons.org/licenses/by/4.0/ info:eu-repo/semantics/openAccess |
_version_ |
1790607513527255040 |