Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator
International audience The aim of this paper is to reverse an assembly line using a mobile platform equipped witha manipulator. By reversibility we mean that the line is able to perform disassembly. For this purpose,an assembly/disassembly line balancing (A/DLB) and asynchronised hybrid Petrinets (S...
Published in: | Control Engineering Practice |
---|---|
Main Authors: | , , |
Other Authors: | , , , , , , , , , |
Format: | Article in Journal/Newspaper |
Language: | English |
Published: |
HAL CCSD
2014
|
Subjects: | |
Online Access: | https://hal.univ-grenoble-alpes.fr/hal-01455493 https://doi.org/10.1016/j.conengprac.2014.06.005 |
id |
ftunivnantes:oai:HAL:hal-01455493v1 |
---|---|
record_format |
openpolar |
spelling |
ftunivnantes:oai:HAL:hal-01455493v1 2023-05-15T16:01:41+02:00 Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator Minca, Eugénia Voda, Alina Filipescu, Adrian Dep. of Automation, Computer Science and Elec. Eng Valahia University of Targoviste Roumanie (UVT) GIPSA - Systèmes linéaires et robustesse (GIPSA-SLR) Département Automatique (GIPSA-DA) Grenoble Images Parole Signal Automatique (GIPSA-lab) Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS)-Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS)-Grenoble Images Parole Signal Automatique (GIPSA-lab) Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS)-Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS) Department of Automation and Industrial Informatics Dunărea de Jos University of Galați Romania Projet PCE Idei (Roumanie) 2014-12-01 https://hal.univ-grenoble-alpes.fr/hal-01455493 https://doi.org/10.1016/j.conengprac.2014.06.005 en eng HAL CCSD Elsevier info:eu-repo/semantics/altIdentifier/doi/10.1016/j.conengprac.2014.06.005 hal-01455493 https://hal.univ-grenoble-alpes.fr/hal-01455493 doi:10.1016/j.conengprac.2014.06.005 ISSN: 0967-0661 Control Engineering Practice https://hal.univ-grenoble-alpes.fr/hal-01455493 Control Engineering Practice, 2014, 31, pp.50-62. ⟨10.1016/j.conengprac.2014.06.005⟩ Assembly/disassembly mechatronics line Balancing Wheeled mobile robot Robotic manipulator Petri nets [INFO.INFO-AU]Computer Science [cs]/Automatic Control Engineering info:eu-repo/semantics/article Journal articles 2014 ftunivnantes https://doi.org/10.1016/j.conengprac.2014.06.005 2023-03-01T05:59:06Z International audience The aim of this paper is to reverse an assembly line using a mobile platform equipped witha manipulator. By reversibility we mean that the line is able to perform disassembly. For this purpose,an assembly/disassembly line balancing (A/DLB) and asynchronised hybrid Petrinets (SHPN) model willbe used to model and control an assembly/disassembly mechatronics line (A/DML), with a fixed numberof workstations, served by a wheeled mobile robot (WMR) equipped with a robotic manipulator (RM).The SHPN model is a hybrid type, where A/DML is the discrete part, and WMR with RM is th econtinuouspart. Moreover, the model operates in synchronised mode with signals from sensors. Disassembly startsafter the assembly process and after the assembled piece fails the quality test, in order to recover theparts. The WMR with RM is used only during disassembly, to transport the parts from the disassemblinglocations to the storage locations. Using these models and a LabView platform, a real-time controlstructure has been designed and implemented, allowing automated assembly and disassembly, wherethe latter is assisted by a mobile platform equipped with a manipulator. Article in Journal/Newspaper DML Université de Nantes: HAL-UNIV-NANTES Control Engineering Practice 31 50 62 |
institution |
Open Polar |
collection |
Université de Nantes: HAL-UNIV-NANTES |
op_collection_id |
ftunivnantes |
language |
English |
topic |
Assembly/disassembly mechatronics line Balancing Wheeled mobile robot Robotic manipulator Petri nets [INFO.INFO-AU]Computer Science [cs]/Automatic Control Engineering |
spellingShingle |
Assembly/disassembly mechatronics line Balancing Wheeled mobile robot Robotic manipulator Petri nets [INFO.INFO-AU]Computer Science [cs]/Automatic Control Engineering Minca, Eugénia Voda, Alina Filipescu, Adrian Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator |
topic_facet |
Assembly/disassembly mechatronics line Balancing Wheeled mobile robot Robotic manipulator Petri nets [INFO.INFO-AU]Computer Science [cs]/Automatic Control Engineering |
description |
International audience The aim of this paper is to reverse an assembly line using a mobile platform equipped witha manipulator. By reversibility we mean that the line is able to perform disassembly. For this purpose,an assembly/disassembly line balancing (A/DLB) and asynchronised hybrid Petrinets (SHPN) model willbe used to model and control an assembly/disassembly mechatronics line (A/DML), with a fixed numberof workstations, served by a wheeled mobile robot (WMR) equipped with a robotic manipulator (RM).The SHPN model is a hybrid type, where A/DML is the discrete part, and WMR with RM is th econtinuouspart. Moreover, the model operates in synchronised mode with signals from sensors. Disassembly startsafter the assembly process and after the assembled piece fails the quality test, in order to recover theparts. The WMR with RM is used only during disassembly, to transport the parts from the disassemblinglocations to the storage locations. Using these models and a LabView platform, a real-time controlstructure has been designed and implemented, allowing automated assembly and disassembly, wherethe latter is assisted by a mobile platform equipped with a manipulator. |
author2 |
Dep. of Automation, Computer Science and Elec. Eng Valahia University of Targoviste Roumanie (UVT) GIPSA - Systèmes linéaires et robustesse (GIPSA-SLR) Département Automatique (GIPSA-DA) Grenoble Images Parole Signal Automatique (GIPSA-lab) Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS)-Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS)-Grenoble Images Parole Signal Automatique (GIPSA-lab) Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS)-Université Pierre Mendès France - Grenoble 2 (UPMF)-Université Stendhal - Grenoble 3-Université Joseph Fourier - Grenoble 1 (UJF)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Centre National de la Recherche Scientifique (CNRS) Department of Automation and Industrial Informatics Dunărea de Jos University of Galați Romania Projet PCE Idei (Roumanie) |
format |
Article in Journal/Newspaper |
author |
Minca, Eugénia Voda, Alina Filipescu, Adrian |
author_facet |
Minca, Eugénia Voda, Alina Filipescu, Adrian |
author_sort |
Minca, Eugénia |
title |
Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator |
title_short |
Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator |
title_full |
Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator |
title_fullStr |
Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator |
title_full_unstemmed |
Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator |
title_sort |
modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator |
publisher |
HAL CCSD |
publishDate |
2014 |
url |
https://hal.univ-grenoble-alpes.fr/hal-01455493 https://doi.org/10.1016/j.conengprac.2014.06.005 |
genre |
DML |
genre_facet |
DML |
op_source |
ISSN: 0967-0661 Control Engineering Practice https://hal.univ-grenoble-alpes.fr/hal-01455493 Control Engineering Practice, 2014, 31, pp.50-62. ⟨10.1016/j.conengprac.2014.06.005⟩ |
op_relation |
info:eu-repo/semantics/altIdentifier/doi/10.1016/j.conengprac.2014.06.005 hal-01455493 https://hal.univ-grenoble-alpes.fr/hal-01455493 doi:10.1016/j.conengprac.2014.06.005 |
op_doi |
https://doi.org/10.1016/j.conengprac.2014.06.005 |
container_title |
Control Engineering Practice |
container_volume |
31 |
container_start_page |
50 |
op_container_end_page |
62 |
_version_ |
1766397442120482816 |