Development of a hatch system for the determination of diffusible hydrogen in underwater welding
The design and implementation of hatch mechanism aims to optimize the development of welding simulations performed in the Robotic, Welding and Simulation Laboratory. The project is part of the upgrade technologies applied to sciences of the sea, and make it possible to evaluate the influence of weld...
Published in: | Respuestas |
---|---|
Main Authors: | , , |
Format: | Article in Journal/Newspaper |
Language: | English Spanish |
Published: |
Universidad Francisco de Paula Santander
2020
|
Subjects: | |
Online Access: | https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433 https://doi.org/10.22463/0122820X.2433 |
id |
ftunivfpsojs:oai:revistas.ufps.edu.co:article/2433 |
---|---|
record_format |
openpolar |
institution |
Open Polar |
collection |
Portal de Revistas Institucionales UFPS (Universidad Francisco de Paula Santander) |
op_collection_id |
ftunivfpsojs |
language |
English Spanish |
topic |
Underwater welding diffusible hydrogen FCAW SMAW inspection hatch Soldadura submarina hidrógeno difusible escotilla de inspección |
spellingShingle |
Underwater welding diffusible hydrogen FCAW SMAW inspection hatch Soldadura submarina hidrógeno difusible escotilla de inspección Fernandes-Lara, Rodrigo Moreno-Uribe, Andrés M. Bracarense, Alexandre Q. Development of a hatch system for the determination of diffusible hydrogen in underwater welding |
topic_facet |
Underwater welding diffusible hydrogen FCAW SMAW inspection hatch Soldadura submarina hidrógeno difusible escotilla de inspección |
description |
The design and implementation of hatch mechanism aims to optimize the development of welding simulations performed in the Robotic, Welding and Simulation Laboratory. The project is part of the upgrade technologies applied to sciences of the sea, and make it possible to evaluate the influence of welding parameters on SMAW and FCAW processes, especially as regards the content of diffusible hydrogen specimen welding in different depths. Due to the specifications imposed by the gas chromatography standards applied to welding, tests must be carried out at short intervals, which requires a fast process. This research will promote the evaluation of commercial electrodes and promote the development of new consumables. El diseño e implementación del mecanismo de escotilla, tiene como finalidad optimizar el desarrollo de simulaciones de soldadura ejecutadas en el Laboratorio de Robótica, Soldadura y Simulación. El proyecto hace parte de la actualización de tecnologías aplicadas a ciencias del mar, y posibilitará evaluar la influencia de los parámetros de soldadura en los procesos SMAW y FCAW, especialmente en lo que se refiere al contenido de hidrógeno difusible en cuerpos de prueba soldados en diferentes profundidades. Debido a las especificaciones impuestas por las normas de cromatografía de gases aplicadas a la soldadura, las pruebas deben desarrollarse en intervalos cortos, lo cual exige un proceso rápido. Esta investigación fomentará la evaluación de electrodos comerciales y promoverá el desarrollo de nuevos consumibles. |
format |
Article in Journal/Newspaper |
author |
Fernandes-Lara, Rodrigo Moreno-Uribe, Andrés M. Bracarense, Alexandre Q. |
author_facet |
Fernandes-Lara, Rodrigo Moreno-Uribe, Andrés M. Bracarense, Alexandre Q. |
author_sort |
Fernandes-Lara, Rodrigo |
title |
Development of a hatch system for the determination of diffusible hydrogen in underwater welding |
title_short |
Development of a hatch system for the determination of diffusible hydrogen in underwater welding |
title_full |
Development of a hatch system for the determination of diffusible hydrogen in underwater welding |
title_fullStr |
Development of a hatch system for the determination of diffusible hydrogen in underwater welding |
title_full_unstemmed |
Development of a hatch system for the determination of diffusible hydrogen in underwater welding |
title_sort |
development of a hatch system for the determination of diffusible hydrogen in underwater welding |
publisher |
Universidad Francisco de Paula Santander |
publishDate |
2020 |
url |
https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433 https://doi.org/10.22463/0122820X.2433 |
genre |
Arctic |
genre_facet |
Arctic |
op_source |
Revista Respuestas; ##issue.vol## 25 ##issue.no## 1 (2020); 168-177 Respuestas; Vol. 25 Núm. 1 (2020); 168-177 2422-5053 0122-820X |
op_relation |
https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433/2815 https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433/3020 R. R. Marinho, M. T. P. Paes, E. C. P. Pessoa, et. al., “Perspectivas e Desafios para Aplicação da Soldagem Subaquática Molhada na PETROBRAS”, Rio Welding, 2014. [En línea]. Disponible en: https://docplayer.com.br/30687506-Perspectivas-e-desafios-para-aplicacao-da-soldagem-subaquatica-molhada-na-petrobras-trabalho-a-ser-apresentado-durante-a-rio-welding-2014.html. B. D. Silvestre and PRT Dalcol, “Geographical proximity and innovation: Evidences from the Campos Basin oil & gas industrial agglomeration-Brazil”, Technovation, vol. 29, no. 8, pp. 546-561, 2009. M. C. Joshi, D. S. Rautela, R. Chauhan and S. Suyal, “Scrutinize Research on Underwater Welding Process: A Review”, IOSR Journal of Mechanical and Civil Engineering., vol. 13, no. 5, pp. 74-78, 2016. C. E. Grubbs, A. E. Bertelmann, S. Ibarra, et. al., Welding Handbook Material and Applications-Part 1. Estados Unidos: AWS, 1996. K. Verma and H. K. Garg, “Underwater Welding-Recent Trends and Future Scope”, International Journal on Emerging Technologies, vol. 3, no. 2, pp. 115-120, 2012. C. E. Grubbs and O. W. Seth, Underwater Wet Welding With Manual Arc Electrodes, ASCE National Water Resources and Ocean Engineering Convention, San Diego, Estados Unidos, 1976. A. M. M. Uribe, A. Q. Bracarense, E. C. P. Pessoa and V. R. Santos, “Influência da Polaridade Sobre a Estabilidade do Processo de Soldagem Subaquática Molhada com Eletrodo Revestido”, Soldagem & Inspeção, vol. 22, no. 4, pp. 429-441, 2017. A. M. Pope, S. Liu, J.C.G. Teixeira, et. al., “Use of Nickel to Improve the Mechanical Properties of High Oxygen Underwater Wet Welds”, 3th OMAE/ International conference on offshore mechanics and arctic engineering, Copenhagen, Denmark, 1995. W. C. D. Silva, A. Q. Bracarense and E. C. P. Pessoa, “Efeito da profundidade de soldagem no hidrogênio difusível de soldas molhadas”, Soldagem & Inspeção, vol. 17, no. 4, pp. 298-305, 2012. M. Rowe and S. Liu, “Recent developments in underwater wet welding”, Science and Technology of Welding and Joining, vol. 6, no. 6, pp. 387-396, 2013. W. C. D. Silva, L. F. Ribeiro, A.Q. Bracarense and E. C. P. Pessoa, “Effect of the Hydrostatic Pressure in the Diffusible Hydrogen at the Underwater Wet Welding”, 31st Internacional Conference on Ocean, Offshore and Artic Engineering, volume 6: Materials Technology, Polar and Arctic Sciences and Technology, Petroleum Technology Symposium, Rio de Janeiro, Brazil, 2012. A. M. M. Uribe, A. Q. Bracarense, E. C. P. Pessoa, et. al., “Metodología de Diseño de una Escotilla de Inspección para Recipientes a Presión”, Investigación e Innovación en Ingenierías, vol. 5, no. 1, pp. 8-23, 2017. https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433 doi:10.22463/0122820X.2433 |
op_rights |
Derechos de autor 2020 Universidad Francisco de Paula Santander https://creativecommons.org/licenses/by-nc/4.0 |
op_doi |
https://doi.org/10.22463/0122820X.2433 |
container_title |
Respuestas |
container_volume |
25 |
container_issue |
1 |
container_start_page |
168 |
op_container_end_page |
177 |
_version_ |
1810294085816156160 |
spelling |
ftunivfpsojs:oai:revistas.ufps.edu.co:article/2433 2024-09-15T17:52:01+00:00 Development of a hatch system for the determination of diffusible hydrogen in underwater welding Desarrollo de un sistema de escotilla para la determinación de hidrógeno difusible en soldadura submarina Fernandes-Lara, Rodrigo Moreno-Uribe, Andrés M. Bracarense, Alexandre Q. 2020-01-01 application/pdf text/html https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433 https://doi.org/10.22463/0122820X.2433 eng spa eng spa Universidad Francisco de Paula Santander https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433/2815 https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433/3020 R. R. Marinho, M. T. P. Paes, E. C. P. Pessoa, et. al., “Perspectivas e Desafios para Aplicação da Soldagem Subaquática Molhada na PETROBRAS”, Rio Welding, 2014. [En línea]. Disponible en: https://docplayer.com.br/30687506-Perspectivas-e-desafios-para-aplicacao-da-soldagem-subaquatica-molhada-na-petrobras-trabalho-a-ser-apresentado-durante-a-rio-welding-2014.html. B. D. Silvestre and PRT Dalcol, “Geographical proximity and innovation: Evidences from the Campos Basin oil & gas industrial agglomeration-Brazil”, Technovation, vol. 29, no. 8, pp. 546-561, 2009. M. C. Joshi, D. S. Rautela, R. Chauhan and S. Suyal, “Scrutinize Research on Underwater Welding Process: A Review”, IOSR Journal of Mechanical and Civil Engineering., vol. 13, no. 5, pp. 74-78, 2016. C. E. Grubbs, A. E. Bertelmann, S. Ibarra, et. al., Welding Handbook Material and Applications-Part 1. Estados Unidos: AWS, 1996. K. Verma and H. K. Garg, “Underwater Welding-Recent Trends and Future Scope”, International Journal on Emerging Technologies, vol. 3, no. 2, pp. 115-120, 2012. C. E. Grubbs and O. W. Seth, Underwater Wet Welding With Manual Arc Electrodes, ASCE National Water Resources and Ocean Engineering Convention, San Diego, Estados Unidos, 1976. A. M. M. Uribe, A. Q. Bracarense, E. C. P. Pessoa and V. R. Santos, “Influência da Polaridade Sobre a Estabilidade do Processo de Soldagem Subaquática Molhada com Eletrodo Revestido”, Soldagem & Inspeção, vol. 22, no. 4, pp. 429-441, 2017. A. M. Pope, S. Liu, J.C.G. Teixeira, et. al., “Use of Nickel to Improve the Mechanical Properties of High Oxygen Underwater Wet Welds”, 3th OMAE/ International conference on offshore mechanics and arctic engineering, Copenhagen, Denmark, 1995. W. C. D. Silva, A. Q. Bracarense and E. C. P. Pessoa, “Efeito da profundidade de soldagem no hidrogênio difusível de soldas molhadas”, Soldagem & Inspeção, vol. 17, no. 4, pp. 298-305, 2012. M. Rowe and S. Liu, “Recent developments in underwater wet welding”, Science and Technology of Welding and Joining, vol. 6, no. 6, pp. 387-396, 2013. W. C. D. Silva, L. F. Ribeiro, A.Q. Bracarense and E. C. P. Pessoa, “Effect of the Hydrostatic Pressure in the Diffusible Hydrogen at the Underwater Wet Welding”, 31st Internacional Conference on Ocean, Offshore and Artic Engineering, volume 6: Materials Technology, Polar and Arctic Sciences and Technology, Petroleum Technology Symposium, Rio de Janeiro, Brazil, 2012. A. M. M. Uribe, A. Q. Bracarense, E. C. P. Pessoa, et. al., “Metodología de Diseño de una Escotilla de Inspección para Recipientes a Presión”, Investigación e Innovación en Ingenierías, vol. 5, no. 1, pp. 8-23, 2017. https://revistas.ufps.edu.co/index.php/respuestas/article/view/2433 doi:10.22463/0122820X.2433 Derechos de autor 2020 Universidad Francisco de Paula Santander https://creativecommons.org/licenses/by-nc/4.0 Revista Respuestas; ##issue.vol## 25 ##issue.no## 1 (2020); 168-177 Respuestas; Vol. 25 Núm. 1 (2020); 168-177 2422-5053 0122-820X Underwater welding diffusible hydrogen FCAW SMAW inspection hatch Soldadura submarina hidrógeno difusible escotilla de inspección info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion 2020 ftunivfpsojs https://doi.org/10.22463/0122820X.2433 2024-06-27T03:03:41Z The design and implementation of hatch mechanism aims to optimize the development of welding simulations performed in the Robotic, Welding and Simulation Laboratory. The project is part of the upgrade technologies applied to sciences of the sea, and make it possible to evaluate the influence of welding parameters on SMAW and FCAW processes, especially as regards the content of diffusible hydrogen specimen welding in different depths. Due to the specifications imposed by the gas chromatography standards applied to welding, tests must be carried out at short intervals, which requires a fast process. This research will promote the evaluation of commercial electrodes and promote the development of new consumables. El diseño e implementación del mecanismo de escotilla, tiene como finalidad optimizar el desarrollo de simulaciones de soldadura ejecutadas en el Laboratorio de Robótica, Soldadura y Simulación. El proyecto hace parte de la actualización de tecnologías aplicadas a ciencias del mar, y posibilitará evaluar la influencia de los parámetros de soldadura en los procesos SMAW y FCAW, especialmente en lo que se refiere al contenido de hidrógeno difusible en cuerpos de prueba soldados en diferentes profundidades. Debido a las especificaciones impuestas por las normas de cromatografía de gases aplicadas a la soldadura, las pruebas deben desarrollarse en intervalos cortos, lo cual exige un proceso rápido. Esta investigación fomentará la evaluación de electrodos comerciales y promoverá el desarrollo de nuevos consumibles. Article in Journal/Newspaper Arctic Portal de Revistas Institucionales UFPS (Universidad Francisco de Paula Santander) Respuestas 25 1 168 177 |