Locating the Hans Tausen drill site
The Hans Tausen drill site was requested to be on a local dome, as high as possible, with a simple flow pattern and with an undisturbed flow pattern even close to bedrock. The first mapping of the surface elevation was performed as part of a general mapping of the elevation and gravity over Greenlan...
Main Authors: | , , , |
---|---|
Format: | Article in Journal/Newspaper |
Language: | English |
Published: |
Dansk Polarcenter, København
2001
|
Subjects: | |
Online Access: | https://lup.lub.lu.se/record/1043604 |
id |
ftulundlup:oai:lup.lub.lu.se:5c1d7140-1bf8-479a-a65c-b4dcdf5552de |
---|---|
record_format |
openpolar |
spelling |
ftulundlup:oai:lup.lub.lu.se:5c1d7140-1bf8-479a-a65c-b4dcdf5552de 2023-05-15T16:28:14+02:00 Locating the Hans Tausen drill site Gundestrup, Niels Keller, Kristian Knudsen, Thomas Jonsson, Peter 2001 https://lup.lub.lu.se/record/1043604 eng eng Dansk Polarcenter, København https://lup.lub.lu.se/record/1043604 MoG Geoscience; 39 (2001) Geotechnical Engineering greenland Hans Tausen glaciology contributiontojournal/article info:eu-repo/semantics/article text 2001 ftulundlup 2023-02-01T23:30:48Z The Hans Tausen drill site was requested to be on a local dome, as high as possible, with a simple flow pattern and with an undisturbed flow pattern even close to bedrock. The first mapping of the surface elevation was performed as part of a general mapping of the elevation and gravity over Greenland. Later, NASA performed a few overflights of the ice cap. Combining the passes, it was possible to get the main features: A mountainous northern part with complicated ice flow, and two more flat southern domes. The eastern dome was higher, and thus more interesting. In 1993, a detailed airborne measurement of the surface elevation and ice thickness was performed. Based on this, the southeastern dome was selected as the best drill site. In 1994, the position of the dome, and additional ice thickness measurements were performed from the surface. This located the exact position of the dome, and allowed staging of drilling material the same year. Finally in 1995, additional measurements of surface elevations over the northern mountains and selected parts of the southeast Dome completed the surface mapping. The measurement showed that the bedrock was very complicated with a southnorth ravine separating the two southern domes. Below the southeast dome however the bedrock was relatively flat with an ice thickness of 345 metres and bedrock changes less than 25 metres. This dome was consequently selected as the site for the drilling to bedrock in 1995. Article in Journal/Newspaper Greenland Ice cap Lund University Publications (LUP) Greenland |
institution |
Open Polar |
collection |
Lund University Publications (LUP) |
op_collection_id |
ftulundlup |
language |
English |
topic |
Geotechnical Engineering greenland Hans Tausen glaciology |
spellingShingle |
Geotechnical Engineering greenland Hans Tausen glaciology Gundestrup, Niels Keller, Kristian Knudsen, Thomas Jonsson, Peter Locating the Hans Tausen drill site |
topic_facet |
Geotechnical Engineering greenland Hans Tausen glaciology |
description |
The Hans Tausen drill site was requested to be on a local dome, as high as possible, with a simple flow pattern and with an undisturbed flow pattern even close to bedrock. The first mapping of the surface elevation was performed as part of a general mapping of the elevation and gravity over Greenland. Later, NASA performed a few overflights of the ice cap. Combining the passes, it was possible to get the main features: A mountainous northern part with complicated ice flow, and two more flat southern domes. The eastern dome was higher, and thus more interesting. In 1993, a detailed airborne measurement of the surface elevation and ice thickness was performed. Based on this, the southeastern dome was selected as the best drill site. In 1994, the position of the dome, and additional ice thickness measurements were performed from the surface. This located the exact position of the dome, and allowed staging of drilling material the same year. Finally in 1995, additional measurements of surface elevations over the northern mountains and selected parts of the southeast Dome completed the surface mapping. The measurement showed that the bedrock was very complicated with a southnorth ravine separating the two southern domes. Below the southeast dome however the bedrock was relatively flat with an ice thickness of 345 metres and bedrock changes less than 25 metres. This dome was consequently selected as the site for the drilling to bedrock in 1995. |
format |
Article in Journal/Newspaper |
author |
Gundestrup, Niels Keller, Kristian Knudsen, Thomas Jonsson, Peter |
author_facet |
Gundestrup, Niels Keller, Kristian Knudsen, Thomas Jonsson, Peter |
author_sort |
Gundestrup, Niels |
title |
Locating the Hans Tausen drill site |
title_short |
Locating the Hans Tausen drill site |
title_full |
Locating the Hans Tausen drill site |
title_fullStr |
Locating the Hans Tausen drill site |
title_full_unstemmed |
Locating the Hans Tausen drill site |
title_sort |
locating the hans tausen drill site |
publisher |
Dansk Polarcenter, København |
publishDate |
2001 |
url |
https://lup.lub.lu.se/record/1043604 |
geographic |
Greenland |
geographic_facet |
Greenland |
genre |
Greenland Ice cap |
genre_facet |
Greenland Ice cap |
op_source |
MoG Geoscience; 39 (2001) |
op_relation |
https://lup.lub.lu.se/record/1043604 |
_version_ |
1766017864573124608 |