An electromagnetic detection case study on crude oil injection in a young sea ice environment

• Published in: IEEE Transactions on Geoscience and Remote Sensing
• Main Authors: Firoozy, Nariman, Neusitzer, Thomas, Desmond, Durell S., Tiede, Tyler, Lemes, Marcos J.L., Landy, Jack, Mojabi, Puyan, Rysgaard, Soren, Stern, Gary, Barber, David G.
• Format: Article in Journal/Newspaper
• Language: English
• Published: 2017
• Subjects: Sea ice
• Online Access: https://hdl.handle.net/1983/fd91a44e-0359-44dc-9381-e91f60381bce; https://research-information.bris.ac.uk/en/publications/fd91a44e-0359-44dc-9381-e91f60381bce; https://doi.org/10.1109/TGRS.2017.2692734; https://research-information.bris.ac.uk/ws/files/144395051/TGARS_Firoozy_Landy_116528594.pdf; http://www.scopus.com/inward/record.url?scp=85019026260&partnerID=8YFLogxK

This paper presents a multidisciplinary case study on a crude oil injection experiment in an artificially grown young sea ice environment under controlled conditions. In particular, the changes in the geophysical and electromagnetic responses of the sea ice to oil introduction are investigated for this experiment. Furthermore, we perform a preliminary study on the detection of oil spills utilizing the normalized radar cross section (NRCS) data collected by a C-band scatterometer is presented. To this end, an inversion scheme is introduced that retrieves the effective complex permittivity of the domain prior and after oil injection by comparing the simulated and calibrated measured NRCS data, while roughness parameters calculated using lidar are utilized as prior information. Once the complex permittivity values are obtained, the volume fraction of oil within the sea ice is found using a mixture formula. Based on this volume fraction, a binary detection of oil presence seems to be possible for this test case. Finally, the possible sources of error in the retrieved effective volume fraction, which is an overestimate of the actual value, are identified and discussed by macrolevel and microlevel analyses through bulk salinity measurements and X-ray imagery of the samples, as well as a brief chemical analysis.