Physical oceanography measured on water bottle samples based on ship CTD during RV POLARSTERN cruise PS131 to the Arctic Ocean, July – August 2022

• Main Authors: Hoppmann, Mario, Tippenhauer, Sandra, Fer, Ilker, Hofmann, Zerlina, Mathieu, Laura, McPherson, Rebecca, Reifenberg, Simon F, von Appen, Wilken-Jon, Kanzow, Torsten
• Format: Dataset
• Language: English
• Published: PANGAEA
• Subjects: Arctic Ocean; Attenuation; optical beam transmission; ATWAICE; AWI_PhyOce; Bio-optical in-situ data; Bottle number; Calculated; Chlorophyll a; Conductivity; CTD; Sea-Bird; SBE 911plus; measured with Temperature sensor; SBE3plus; measured with Conductivity sensor; SBE 4; measured with Dissolved oxygen sensor; SBE 43; measured with Fluorometer; WET Labs; ECO FLCD; ECO FLRTD; measured with PAR sensor; measured with Transmissometer; Arctic; Berichte zur Polar- und Meeresforschung; East Greenland; Fram Strait; glacier; Greenland; Reports on Polar and Marine Research; Scoresby Sound; Sea ice; Svalbard
• Online Access: https://doi.pangaea.de/10.1594/PANGAEA.966337

During RV Polarstern expedition PS131 to the Arctic Ocean, a number of hydrographic profiles were obtained using a ship-based Seabird SBE911plus CTD rosette system. The expedition, also referred to as "ATWAICE": ATlantic WAter pathways to the ICE, took place between 28 June and 17 August 2022 and investigated sea ice and ocean properties in the Arctic Ocean, with a focus on melt processes. The main work areas included Fram Strait, the marginal ice zone northwest of Svalbard, and the East Greenland coast close to the 79°N glacier. A few stations were also done at the Aurora vent field and in Scoresby Sound. This dataset comprises the processed bottle data of all 64 CTD stations performed during this expedition. The list of parameters include bottle number, measurement pressure/depth, seawater temperature, conductivity, salinity, dissolved oxygen, optical beam transmission, Chl-a and CDOM fluorescence, photosynthetically active radiation (PAR), along with selected derived variables. Temperature, conductivity/salinity and oxygen were chosen from two independent sensors sets. Temperature offset was corrected using post-cruise calibration results. Salinity was calibrated against in-situ samples measured by an Optimare Precision Salinometer. Dissolved oxygen was calibrated against in-situ samples analyzed by means of Winkler titration. Temporal and pressure drift of these parameters were identified, and corrected accordingly. The optical measurements were converted according to the manufacturer calibration of the respective instrument, but not calibrated against any other measurements. An overview of the sensor configuration and a detailed description of all individual steps is available in the attached processing report, which also includes all relevant calibration sheets.