Aircraft measurements of the boundary layer structure over Nares Strait (Greenland) during campaign IKAPOS with POLAR 5 on 2010-06-18

• Main Author: Heinemann, Günther
• Format: Dataset
• Language: English
• Published: PANGAEA 2024
• Subjects: AC; aircraft; atmospheric boundary layer; Date/Time of event; Date/Time of event 2; Event label; IKAPOS; IKAPOS_20100616_A-B1; IKAPOS_20100616_A-Q1a; IKAPOS_20100616_Q1; IKAPOS_20100616_Q3; Latitude of event; Latitude of event 2; Longitude of event; Longitude of event 2; Nares Strait; POLAR 5; Text file; Greenland; Nares; Nares strait
• Online Access: https://doi.pangaea.de/10.1594/PANGAEA.965811; https://doi.org/10.1594/PANGAEA.965811

Gap flows and the stable boundary layer were studied in northwest Greenland during the aircraft-based experiment IKAPOS (Investigation of Katabatic winds and Polynyas during Summer) in June 2010. The measurements were performed using the research aircraft POLAR 5 of Alfred Wegener Institute (AWI, Bremerhaven, Wesche et al. 2016). Besides navigational and basic meteorological instrumentation, the aircraft was equipped with radiation and surface temperature sensors and with a turbulence measurement system. The calibration procedure is described in Drüe and Heinemann (2013). A detailed description of the experimental setup, the flight missions and the aircraft sensors are given in the field phase report (Heinemann et al. 2011) and in Heinemann (2018). The vertical profiles were flown as slantwise aircraft profiles (ascents or descents). The data were measured at a sampling rate of 100 Hz. For the profiles, a more convenient 1 Hz subset was extracted from the 100 Hz data set and turbulent fluctuations are filtered out using a low-pass filter of 0.05 Hz. Four flight missions were flown over the Nares Strait and the North Water (NOW) polynya: 15, 18, 22, and 23 June 2010. The data are consecutive vertical profiles flown along the Nares Strait and across Nares Strait at different positions (see Heinemann et al. 2011) for plots and coordinates of starting points (also included in the data). Data of temperature, potential temperature, specific humidity, wind speed and direction are included in the data set.