Continuous thermosalinograph oceanography along RV POLARSTERN cruise track PS123

• Main Authors: Hoppmann, Mario, Tippenhauer, Sandra, Heitland, Tim
• Format: Dataset
• Language: English
• Published: PANGAEA 2023
• Subjects: AWI_PhyOce; Calculation according to Practical Salinity Scale PSS-78; Lewis and Perkin (1981); Conductivity; DAM_Underway; DAM Underway Research Data; DATE/TIME; DEPTH; water; Digital oceanographic thermometer; Sea-Bird; SBE 38; GPF 20-1_017; LATITUDE; LONGITUDE; Physical Oceanography @ AWI; Polarstern; PS123; PS123_0_Underway-23; Quality flag; salinity; water temperature; Seadatanet flag: Data quality control procedures according to SeaDataNet (2010); T/S data; Temperature; internal; Thermosalinograph; Thermosalinograph (TSG); SBE 21 SEACAT; TSG; Berichte zur Polar- und Meeresforschung; Reports on Polar and Marine Research
• Online Access: https://doi.pangaea.de/10.1594/PANGAEA.938753; https://doi.org/10.1594/PANGAEA.938753

This dataset contains processed ocean temperature and salinity data at a depth of 11m along the cruise track. Raw data acquired by two SBE21 thermosalinographs and two auxiliary SBE38 temperature sensors (Sea-Bird Scientific, USA) installed in an underway seawater flow-through system on board RV Polarstern were processed to yield a calibrated and validated data set of temperature and salinity along the cruise track. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) at a resolution of 1 sec, and converted to temperature and conductivity using the pre-deployment factory calibration coefficients. The converted data were averaged to 1 min values, outliers were removed, and sensor drift was corrected using coefficients obtained from a post-season calibration performed at Sea-Bird at the end of the measurement season. Salinity was calculated from internal temperature, conductivity and pressure according to the PSS-78 Practical Salinity Scale. Processed data are provided as 1 min means of seawater temperature, conductivity and salinity, aligned with position data taken from the master track. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010). More details are described in the attached processing report.