Thermodynamic scaling of ice ridge consolidation

• Published in: Cold Regions Science and Technology
• Main Author: Salganik, Evgenii
• Other Authors: Høyland, Knut Vilhelm, Marchenko, Alexey, Shestov, Alexey
• Format: Doctoral or Postdoctoral Thesis
• Language: English
• Published: NTNU 2020
• Subjects: VDP::Technology: 500::Environmental engineering: 610; Arctic
• Online Access: https://hdl.handle.net/11250/2679182

Laboratory and field experiments together with analytical and numerical simulations were performed to study the scaling of the ice ridge consolidation. Such experiments and corresponding thermodynamic models are an important method for describing and predicting morphological, physical, and mechanical properties of the consolidated layer, corresponding atmospheric heat fluxes, and structural loads. The laboratory-scale experiments covered ice ridges, grown from freshwater, seawater, and water-ethanol solution with different types of morphology including with parallel blocks. Such morphology was used to decrease effects from the ridge inhomogeneity, and to increase the measurement accuracy of the ridge macroporosity and the ice thickness. This allowed for separate investigations of the effects from the other ridge parameters including block thickness, ice initial temperature, and the ridge sail height. The effect of the faster growth rate of the consolidated layer over the level ice for small-scale ridges observed experimentally was found to be related to the difference in convective-conductive coupling for the two types of ice, which can be increased by the extended ridge sail surfaces. The experiments with water-ethanol ice showed no significant difference in consolidation rates with the freshwater ice ridges. The full-scale experiments covered saline ice ridges artificially made from the surrounding level ice. This method allowed us to increase the accuracy of the macroporosity and initial ice temperature values. The results of the field measurements confirmed the thickness overestimation based on the measured temperature profile in the ridge blocks in comparison to the ridge voids. This thickness overestimation was also observed in small-scale experiments. The effect of slower consolidation rates for the full-scale ridges during the initial phase observed experimentally was found to be related to the significant deviation of those ridges from the homogeneous approach. Simulations of the ridge consolidation were performed using a two-dimensional finite element method with the moving boundary and the discrete rubble blocks. It was validated by the performed laboratory and field experiments for different scales and different types of ice. It allowed deeper investigations of the effects from the ridge sail, rubble block initial temperature and thickness, ridge keel, and the thickness estimation methods for the consolidated layer. It has also been able to describe the scale-effects in the previous ridge experiments. The simulations helped to provide insight into the analysis of the ice ridge thermal investigations, the estimation algorithms for the consolidated layer thickness, and on the distribution of the heat transfer through the different ridge parts. The difference between fresh and saline ice growth was equally important for level ice and ice ridges, but its values were becoming significant during the initial and warming phases. The analytical model of ridge consolidation was also formulated and validated using numerical simulations, field, and laboratory experiments. This model also allows to consider sail height, block thickness, initial ice temperature, ice salinity, and snow thickness, but cannot consider the thermal inertia. This analytical ridge model could be used for the prediction of the consolidated layer thickness in the probabilistic analysis of ice actions on structures.