Undersökning av separationsfenomen i en virvelbäddsugn i pilotskala med hjälp av en 1:1 skalad kallmodell
In this thesis work experiments are performed on a 1:1 scaled cold model of a fluidized bed pilot plant located at Swerea Mefos research center in Luleå. The purpose of these experiments were to solve the problems experienced when trying to separate the fed copper concentrate from the sand bed, abou...
Main Author: | |
---|---|
Format: | Bachelor Thesis |
Language: | English |
Published: |
2014
|
Subjects: | |
Online Access: | http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-48383 |
Summary: | In this thesis work experiments are performed on a 1:1 scaled cold model of a fluidized bed pilot plant located at Swerea Mefos research center in Luleå. The purpose of these experiments were to solve the problems experienced when trying to separate the fed copper concentrate from the sand bed, about 50% of the fed concentrate never left the bed. The solution to this problem was to increase the gas velocity in the freeboard part of the bed from 0.28 m/s to 0.43 m/s, this can be done by increasing the gas flow in the bottom of the bed or by decreasing the freeboard diameter. In addition to this a method have been developed to characterize the bed in the pilot by analyzing pressure data. With this pressure data it is possible to approximate the bed height and distinguish the fluidization regime in the bed without direct observation. Validerat; 20140822 (global_studentproject_submitter) |
---|