Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems
This Master Thesis was accomplished during the period 20th August 2007 to 18th of January 2008 at Volvo Aero Corporation. The Master Thesis was the final moment in the MSc programme in Mechanical Engineering at Luleå University of Technology. During the development of a new aero engine family a new...
Main Author: | |
---|---|
Format: | Bachelor Thesis |
Language: | English |
Published: |
2008
|
Subjects: | |
Online Access: | http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-45976 |
id |
ftluleatu:oai:DiVA.org:ltu-45976 |
---|---|
record_format |
openpolar |
spelling |
ftluleatu:oai:DiVA.org:ltu-45976 2023-05-15T17:09:17+02:00 Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems Samskog, Simon 2008 application/pdf http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-45976 eng eng http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-45976 Local 39e3bdad-1989-4d79-bac0-ec06ba1a2037 info:eu-repo/semantics/openAccess Technology Composites Unison ring Weight reduction Variable Bleed Valve System Teknik Student thesis info:eu-repo/semantics/bachelorThesis text 2008 ftluleatu 2022-10-25T20:52:19Z This Master Thesis was accomplished during the period 20th August 2007 to 18th of January 2008 at Volvo Aero Corporation. The Master Thesis was the final moment in the MSc programme in Mechanical Engineering at Luleå University of Technology. During the development of a new aero engine family a new Variable Bleed Valve system (VBV-system) was designed, the second phase of this design was to reduce the weight of the components by considering alternative materials and methods of manufacture: thus improving Specific Fuel Consumption (SFC). Several concepts were discussed with regards to the VBV- system and one of these was to replace some of the existing metallic (Aluminum & Titanium) components with a composite alternative and the unison ring was considered to be a prime candidate for this study. The challenge in using composites is the complexity of the material. Different mechanical properties and performance can be achieved by different numbers of layers, fiber orientations and choice of fiber and matrix. In order to use composites, a full understanding of the mechanical behavior of the unison ring is required. This resulted in a review study of the existing unison ring. The most important task was to investigate how changes in the unison ring stiffness could affect the opening and closing of the 10 VBV doors, located in the Fan Hub Frame. With the results given in the review study, a concept generation (including basic laminate theory) was made to determine the final concept design. From the concept generation, it was determined that the unison ring should be designed as a sandwich, with composite laminates on top and bottom. Between the two composite laminates foam or honeycomb should be used. The composite material was chosen to be a standard aerospace composite, which are based on long fiber reinforcements (carbon) with epoxy matrix. Most of the fibers are orientated along the unison ring, to keep both tensile stiffness (AE) and bending stiffness along the unison ring as high as possible. To ensure that ... Bachelor Thesis Luleå Luleå Luleå Luleå University of Technology Publications (DiVA) |
institution |
Open Polar |
collection |
Luleå University of Technology Publications (DiVA) |
op_collection_id |
ftluleatu |
language |
English |
topic |
Technology Composites Unison ring Weight reduction Variable Bleed Valve System Teknik |
spellingShingle |
Technology Composites Unison ring Weight reduction Variable Bleed Valve System Teknik Samskog, Simon Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems |
topic_facet |
Technology Composites Unison ring Weight reduction Variable Bleed Valve System Teknik |
description |
This Master Thesis was accomplished during the period 20th August 2007 to 18th of January 2008 at Volvo Aero Corporation. The Master Thesis was the final moment in the MSc programme in Mechanical Engineering at Luleå University of Technology. During the development of a new aero engine family a new Variable Bleed Valve system (VBV-system) was designed, the second phase of this design was to reduce the weight of the components by considering alternative materials and methods of manufacture: thus improving Specific Fuel Consumption (SFC). Several concepts were discussed with regards to the VBV- system and one of these was to replace some of the existing metallic (Aluminum & Titanium) components with a composite alternative and the unison ring was considered to be a prime candidate for this study. The challenge in using composites is the complexity of the material. Different mechanical properties and performance can be achieved by different numbers of layers, fiber orientations and choice of fiber and matrix. In order to use composites, a full understanding of the mechanical behavior of the unison ring is required. This resulted in a review study of the existing unison ring. The most important task was to investigate how changes in the unison ring stiffness could affect the opening and closing of the 10 VBV doors, located in the Fan Hub Frame. With the results given in the review study, a concept generation (including basic laminate theory) was made to determine the final concept design. From the concept generation, it was determined that the unison ring should be designed as a sandwich, with composite laminates on top and bottom. Between the two composite laminates foam or honeycomb should be used. The composite material was chosen to be a standard aerospace composite, which are based on long fiber reinforcements (carbon) with epoxy matrix. Most of the fibers are orientated along the unison ring, to keep both tensile stiffness (AE) and bending stiffness along the unison ring as high as possible. To ensure that ... |
format |
Bachelor Thesis |
author |
Samskog, Simon |
author_facet |
Samskog, Simon |
author_sort |
Samskog, Simon |
title |
Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems |
title_short |
Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems |
title_full |
Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems |
title_fullStr |
Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems |
title_full_unstemmed |
Weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems |
title_sort |
weight reduction of a unison ring : a study of composite materials and its potential in design of future variable bleed valve systems |
publishDate |
2008 |
url |
http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-45976 |
genre |
Luleå Luleå Luleå |
genre_facet |
Luleå Luleå Luleå |
op_relation |
http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-45976 Local 39e3bdad-1989-4d79-bac0-ec06ba1a2037 |
op_rights |
info:eu-repo/semantics/openAccess |
_version_ |
1766065340654026752 |