Temperature and heating induced temperature difference measurements from the sea ice mass balance buoy DTC31 during MOSAiC 2019/2020 ...

• Main Authors: Salganik, Evgenii, Hoppmann, Mario, Scholz, Daniel, Kolabutin, Nikolai, Shimanchuk, Egor, Demir, Oguz, Haapala, Jari
• Format: Article in Journal/Newspaper
• Language: English
• Published: PANGAEA 2023
• Subjects: autonomous platform; buoy; Ice mass balance; Temperature; Digital thermistor chain; PS122/1; Polarstern; Multidisciplinary drifting Observatory for the Study of Arctic Climate MOSAiC; Arctic; Arctic Ocean; Sea ice
• Online Access: https://dx.doi.org/10.1594/pangaea.962457; https://doi.pangaea.de/10.1594/PANGAEA.962457

Temperature and heating-induced temperature were measured along a chain of thermistors. Digital Thermistor Chain DTC31 is an autonomous instrument that was installed on drifting sea ice in the Arctic Ocean during the MOSAiC expedition on 22 November 2020. The thermistor chain was 5.12 m long and included sensors with a regular spacing of 2 cm. The resulting time series describes the evolution of temperature during the heating cycle of 20 s and after the heating cycle during the following 40 s as a function of geographic position (GPS), depth, and time between 22 November 2019 and 15 July 2020 in sample intervals of 6 hours. It also contains manually estimated positions of air-snow, snow-ice, and ice-water interfaces. The DTC was installed in deformed second-year ice at Transect North. Radiation station 2020R14 was installed next to the DTC31: doi:10.1594/PANGAEA.948572. ... : Temperature after the cooling cycle and temperature before the heating cycle both represent in situ temperature. The temperature before the heating cycle may contain errors in measurements and is provided for reference. It is recommended to use temperature after the cooling cycle and temperature difference after the heating cycle for further analysis. ...