Heating induced temperature difference measurements from radiation station 2019R8: 52 s after the heating cycle ...

• Main Authors: Nicolaus, Marcel, Belter, Hans Jakob, Rohde, Jan, Hoppmann, Mario, Tao, Ran, Katlein, Christian
• Format: Dataset
• Language: unknown
• Published: PANGAEA 2024
• Subjects: autonomous platform; Backscatter; buoy; chlorophyll; Conductivity; drift; FDOM; Ice mass balance; Oxygen; snow depth; solar radiation; DATE/TIME; LATITUDE; LONGITUDE; Quality flag, position; Temperature, difference; Buoy, radiation station; AF-MOSAiC-1; Akademik Fedorov; Current sea ice maps for Arctic and Antarctic meereisportal.de; Multidisciplinary drifting Observatory for the Study of Arctic Climate MOSAiC; Sea Ice Physics @ AWI AWI_SeaIce; Antarc*; Antarctic; Arctic Ocean; Sea ice
• Online Access: https://dx.doi.org/10.1594/pangaea.948940; https://doi.pangaea.de/10.1594/PANGAEA.948940

Solar radiation over and under sea ice was measured by radiation station 2019R8, an autonomous platform, installed on drifting First-Year-Ice (FYI) in the Arctic Ocean during MOSAiC (Leg 1) 2019/20. The resulting time series describes radiation measurements as a function of place and time between 05 October 2019 and 31 July 2020 in sample intervals of 3 hours. The radiation measurements have been performed with spectral radiometers. All data are given in full spectral resolution interpolated to 1.0 nm, and integrated over the entire wavelength range (broadband, total: 320 to 950 nm). Two sensors, solar irradiance and upward reflected solar irradiance, were mounted on a on a platform about 1 m above the sea ice surface. The third sensor was mounted 0.5 m underneath the sea ice measuring the downward transmitted irradiance. Along with the radiation measurements, this autonomous platform consisted of a 5 m long thermistor chain with sensor spacing of 0.02 m and several other sensor packages, which measured ... : The data set has been processed and contains quality flags for different kinds for erroneous data. Flag values are the sum of individual error codes. The value of 0 refers to no error. Quality flag, position: The geographic position is flagged +1 if the drift velocity, as derived from the GPS longitude and latitude, exceeds a threshold of 10 deg latitude or 50 deg longitude per time step; +2 if the position exceeds extreme values, such as longitude > 360 deg; +4 if the position is exactly 0.0. ...