Temperature and heating induced temperature difference measurements from SIMBA-type sea ice mass balance buoy 2020T74, deployed during MOSAiC 2019/20

• Main Authors: Lei, Ruibo, Hutchings, Jennifer K, Cheng, Bin, Hoppmann, Mario
• Format: Article in Journal/Newspaper
• Language: English
• Published: PANGAEA - Data Publisher for Earth & Environmental Science 2022
• Subjects: Arctic Ocean; MOSAiC-ICE; Sea ice mass balance; SIMBA; snow; Temperature; SAMS Ice Mass Balance buoy; PS122/3; Polarstern; Multidisciplinary drifting Observatory for the Study of Arctic Climate MOSAiC; Arctic; Sea ice
• Online Access: https://dx.doi.org/10.1594/pangaea.940692; https://doi.pangaea.de/10.1594/PANGAEA.940692

Temperature and heating-induced temperature differences were measured along a chain of thermistors. SIMBA 2020T74 (a.k.a. PRIC_10_02, IRIDIUM number 300234068225520) is an autonomous instrument that was installed on drifting sea ice in the Arctic Ocean during the 3rd leg of the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) in April 2020. The buoy was deployed at the site with about 2 km from the ship with initial thicknesses of snow and ice of 0.08 and 1.70 m, respectively, on 4 April 2020. The thermistor chain was 5 m long and included 241 sensors with a regular spacing of 2 cm. The depths for the sensors are 98 to -380 cm, referring to the initial interface between snow and ice. The last sensor was used to measure the air temperature at 1 m above the initial snow surface. The resulting time series describes the evolution of temperature and temperature differences after two heating cycles of 30 and 120 s as a function of depth and time between 4 April 2020 and 7 August 2020 in sample intervals of 6 hours for temperature and 24 hours for temperature differences. In addition to temperature, geographic position, barometric pressure, tilt and compass were measured. : The data set has been processed and contains quality flags for different kinds for erroneous data. Flag values are the sum of individual error codes. The value of 0 refers to no error. Quality flag, position: The geographic position is flagged +1 if the drift velocity, as derived from the GPS longitude and latitude, exceeds a threshold of 10 deg latitude or 50 deg longitude per time step; +2 if the position exceeds extreme values, such as longitude > 360 deg; +4 if the position is exactly 0.0.