Physical oceanography during MARIA S. MERIAN cruise MSM56 (MECAF) ...

Data presented here were collected during the cruise MSM56 (Project MECAF) with the RV Maria S. Merian from Longyearbyen, Svalbard, Norway to Reykjavik, Iceland (July 01, 2016 to July 23, 2016). In total, 56 vertical CTD-hauls were conducted with the onboard CTD: in general, a deep cast up to bottom...

Full description

Bibliographic Details
Main Authors: Friedrichs, Anna, Schwalfenberg, Kai, Koch, Boris P, Zielinski, Oliver
Format: Dataset
Language:English
Published: PANGAEA 2017
Subjects:
Event label
Date/Time of event
Latitude of event
Longitude of event
Elevation of event
DEPTH, water
Pressure, water
Temperature, water
Conductivity
Oxygen
Height above sea floor/altitude
Radiation, photosynthetically active
Fluorescence, chlorophyll
Turbidity Nephelometric turbidity unit
Fluorometer
Salinity
Number of observations
CTD/Rosette
Pressure sensor, Digiquartz
CTD, SEA-BIRD SBE 911plus, SN 5708 / SN 4261
derived from SBE43 oxygen sensor
Altimeter
Fluorometer, WET Labs ECO AFL/FL
microFlu chl-a, Trios, SN 106A
Calculated
MSM56
Maria S. Merian
Longyearbyen
Norway
Svalbard
Iceland
Online Access:https://dx.doi.org/10.1594/pangaea.871015
https://doi.pangaea.de/10.1594/PANGAEA.871015
Description
Summary:Data presented here were collected during the cruise MSM56 (Project MECAF) with the RV Maria S. Merian from Longyearbyen, Svalbard, Norway to Reykjavik, Iceland (July 01, 2016 to July 23, 2016). In total, 56 vertical CTD-hauls were conducted with the onboard CTD: in general, a deep cast up to bottom depth. The CTD system used was a Sea-Bird Electronics Inc. SBE 911plus, attached to a SBE 32 Carousel Water Sampler containing 24x 10-liter bottles. The system was equipped with: double temperature and conductivity probes, a pressure sensor (Digiquartz), an oxygen sensor (SBE 43), an altimeter (Benthos) and a chlorophyll fluorometer combined with a turbidity sensor (WET Labs ECO-AFL/FL). The sensors were pre-calibrated by the manufacturers for the ECO- AFL/FL additionally a post-cruise-calibration was done by the manufacturer. The data were recorded with the Seasave V 7.22 software and processed using SeaBird SBE Data Processing software. Data are visually checked. The ship position was derived from the shipboard ... : Binned at 1 m vertical intervals ...

Similar Items