LiDAR elevation data of Yukon Coast and Herschel Island in 2012 and 2013 ...

LiDAR scanning of the Yukon Coast and Herschel Island took place during the AIRMETH (AIRborne studies of METHane emissions from Arctic wetlands) campaigns (Kohnert et al., 2014) on 10 July 2012 and on 22 July 2013. Point cloud data were acquired with a RIEGL LMSVQ580 laser scanner instrument on boar...

Full description

Bibliographic Details
Main Authors: Obu, Jaroslav, Lantuit, Hugues, Fritz, Michael, Grosse, Guido, Günther, Frank, Sachs, Torsten, Helm, Veit
Format: Article in Journal/Newspaper
Language:English
Published: PANGAEA 2016
Subjects:
Online Access:https://dx.doi.org/10.1594/pangaea.859046
https://doi.pangaea.de/10.1594/PANGAEA.859046
Description
Summary:LiDAR scanning of the Yukon Coast and Herschel Island took place during the AIRMETH (AIRborne studies of METHane emissions from Arctic wetlands) campaigns (Kohnert et al., 2014) on 10 July 2012 and on 22 July 2013. Point cloud data were acquired with a RIEGL LMSVQ580 laser scanner instrument on board the Alfred Wegener Institute's POLAR-5 science aircraft. The laser scanner was operated with a 60° scan angle at a flight height of around 200 m above ground in 2012 and 500 m in 2013. This resulted in a scan width from 200 (2012) to 500 m (2013) and a mean point-to-point distance of 0.5–1.0 m. During the flight on July 10, 2012 the weather was cloudy with a cloud base around 200 m.a.s.l. . Air temperature ranged between 10 and 12 °C with wind speed ranging from 15 to 19 km/h from easterly direction (70–90°). The last recorded storm was on June 17. During the scanning on July 22, 2013, the weather was nearly cloudless with air temperature 9 °C. Wind speed was 15 km/h from easterly direction (60–80°). The last ... : Supplement to: Obu, Jaroslav; Lantuit, Hugues; Grosse, Guido; Günther, Frank; Sachs, Torsten; Helm, Veit; Fritz, Michael (2017): Coastal erosion and mass wasting along the Canadian Beaufort Sea based on annual airborne LiDAR elevation data. Geomorphology, 293, 331-346 ...